20 Most Recent KitchenAid KSB3 Classic Work Top Blender - Page 4 Questions & Answers

http://www.appliancepartspros.com/search.aspx?model=ksb50b3

The clutches are replaceable. Locate a local service agent and either get them to fit it or buy one and fit it yourself. Here in NZ they come with instructions in the bag.

Buy a new one from K/A

No the big one is not the blender.

Colin if another K/A model jar would fit K/A would know and should have told you.

Undo the 4 screws underneath, remove top drive first.

If you have no electrical ability best take it to "the man" Solution is only going to be found by opening it up and testing circuits.

If you have no electrical ability best take it to "the man" Solution is only going to be found by opening it up and testing circuits.

If you have the glass jar then purchase either a new rubber seal for the blade to jar fitment or replace the blade assembly, it will be one or the other. If you have plastic beaker then get a new beaker, it is sold as a single assembly.

There is an air port near the adjustment knob. Open for a more blue flame and close for a yellow flame. If these haven't been moved before, you probably have a clogged jet at the burner. Just clean it out with a pin.

Would need your model number to look for a service manual, but first search did not show ANY service manuals online for a Kitchenaid blender. You can call the manufacturer at this number
Contact Kitchenaid Customer Experience Center at 1-800-422-1230. they may be able to help you find a local service center near you.

If you want to send us the model number of your blender we can look again for a service repair manual. Thank you for using Fixya.