Top 20 KitchenAid KFC3100 Chef's Chopper Food Processor Questions & Answers


I think it will start, when you close the lid

KitchenAid... | 137 views | 0 helpful votes


Lost movement, new bowl or lid.

KitchenAid... | 192 views | 0 helpful votes


Top of lid twists...It was sooooo stuck, I was afraid to twist very hard. I got it though.

KitchenAid... | 240 views | 0 helpful votes


The manufacturer's website does not provide any information that would suggest that there is a release or a particular technique for removing.

If you were forced to leave in place after using it is possible that food residue has dried and is contributing to the problem. Suggest you try adding some warm soapy water to the bowl and let soak for 10 - 15 minutes.

Pour off the soapy water and then while wearing a protective glove see if you are able to remove the blade with some careful wiggling and twisting.

The following resources may be useful references in the future.

Owner's Manual:

http://useandcares.hamiltonbeach.com/files/840112600.pdf


Parts Lists:

http://www.kitchenaid.ca/assets/pdfs/literature/Repair%20Part%20List%20-%208204526.pdf

KitchenAid... | 326 views | 0 helpful votes


Go to http://www.appliancepartspros.com/ and search by model number. They have everything you need at good prices. They have saved me lots of $$$ on various replacement parts as they are usually the cheapest because of tax and shipping. Hope this helps!

KitchenAid... | 135 views | 0 helpful votes


I always mention 1800Parts.com because they get us everything. Check their website or call them and see if they can get you the part. Tell them we sent you and they might give you a discount.

KitchenAid... | 113 views | 0 helpful votes


hello. here is the link to the kitchenaid manuals
http://www.kitchenaid.com/flash.cmd?/#/page/customer-service
this is a free download.
kindly rate my answer as helpful. thanks, joe

KitchenAid... | 393 views | 3 helpful votes


I have the original manual and recipe book for this pasta maker. I could scan it and then fax or email certain pages if it is still needed. Don

KitchenAid... | 2,020 views | 5 helpful votes


The Kitchenaid food choppers have a few safety features implimented. If the unit is not assembled properly, this may prevent the unit from turning on. Proper assembly is below:

If it isn't all ready, please disassemble the entire unit. This means removing work bowl, work bowl lid, and blade.

Start by placing the work bowl onto the motor base. The work bowl handle should be facing at 9 o'clock, which is out to your left. Rotate the handle downward until it locks in at the 6 o'clock position, which will lock over the center of the button panel.

Repeat the process with the work bowl lid. The blade does not need to be present for the motor to engage, if this is an assembly issue.

KitchenAid... | 632 views | 3 helpful votes


Manuals for Kitchenaid appliances may all be downloaded and printed from Kitchenaid.com.

On the main page, click "Customer Care" in the upper-right hand corner. Then click "Locate Manuals and Guides."

You will need to enter your model number exactly as it appears on the bottom of the appliance. You should find the model number on a white sticker.

KitchenAid... | 447 views | 0 helpful votes


I have the 11 cup Kitchenaid food processor and did the same thing this weekend. It took a while but finally figured out how it went back together. Hopefully the pictures help. I know it's difficult to see since the pieces are all black. Good luck!

e0153642-b193-456a-b3da-d61ff8100969.jpeg


6610141b-4582-49d9-9bd5-788c4b7c1fd4-qhxllv4npmtu554ro0tn0uuy-4-2.jpeg

KitchenAid Food... | 636 views | 0 helpful votes


Make sure you have the bowl, lid and sometimes the pusher assembled correctly. If everything is not correct it will not activate the safety switch to allow it to start up.

KitchenAid Food... | 245 views | 0 helpful votes


take it back and get a warranty replacement unit
reading the user manual may be a help

KitchenAid Food... | 343 views | 1 helpful votes


Possibly something about either the lid or the bowl has become deformed. Very likely you will need to replace one or the other.

KitchenAid Food... | 382 views | 0 helpful votes


The solution is 90% going to be replace the lid, or replace the bowl or if you are very unlucky replace both. A proper KitchenAid service agent should have both parts on the shelf and will be able to try a new one of either to see where the fault lies. I think over the years I've replaced more lids than I have bowls.

KitchenAid Food... | 392 views | 0 helpful votes


Read the handbook and make certain you are assembling the bowl, lid and pusher correctly, they can all play a part in activating the safety mechanisms that put the appliance in the mode that will allow it to be started.

KitchenAid Food... | 2,616 views | 0 helpful votes

Not finding what you are looking for?
KitchenAid KFC3100 Chef's Chopper Food Processor Logo

30 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Processors Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Zhareese

Level 2 Expert

177 Answers

john h

Level 3 Expert

23438 Answers

Are you a KitchenAid Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

KitchenAid Food Processors

  • KitchenAid Food Processors

Most Popular Question

kitchenaid mo kfc3200082

  • Food Processors
Loading...