KitchenAid KSM90 Ultra Power Series Stand Mixer - Answered Questions & Fixed issues


What is the point of this post, there is no question and it appears to have been dragged forward from 2014. Trolls are among us.

KitchenAid KSM90... | Answered on Jan 20, 2020 | 241 views


Hiya,
Please see below video how to replace a worm gear in your appliance. Whilst I understand, you do not wish to replace worm gear, this video will show you how to take your mixer apart.

https://www.youtube.com/watch?v=n7813f_z6qM

KitchenAid KSM90... | Answered on Jan 16, 2020 | 148 views


Hiya,

I am sorry to hear you are having problems with your mixer. To stop the oil leaking from the front of the mixer, you just need to remove the drip ring and give it a good clean underneath and this should stop the oil from leaking out. Below I have added a link and if you watch on the timing "1.28" you will see how to remove the drip ring.

https://www.youtube.com/watch?v=n7813f_z6qM

I hope this helps!

KitchenAid KSM90... | Answered on Dec 03, 2019 | 127 views


Hiya,

I am sorry to hear you are having problems with your mixer.

The first place I would start is to look at your Motor Brushes, they may have been placed in incorrectly or have worn down too much. I have added a link below for our help video on checking and replacing the motor brushes:

https://www.youtube.com/watch?v=5YuS3atXR0M

I hope this helps you :)

KitchenAid KSM90... | Answered on Nov 20, 2019 | 178 views


Hello there,

Sorry to hear you are experiencing an issue with your appliance, please see the link to help page below to help you resolve this problem:

KitchenAid KSM90... | Answered on Nov 02, 2019 | 258 views


Hiya,

I am sorry to hear you are having issues with your appliance. I have added a link below for our help video on setting the correct speed on your mixer:

https://www.youtube.com/watch?v=bM3t46afGcc

I hope this helps you with the issue with your mixer :)

KitchenAid KSM90... | Answered on Oct 30, 2019 | 128 views


Hiya,

I am sorry to hear you are having problems with your lever.

I have added a link below for our help page on replacing your speed lever:

https://www.youtube.com/watch?v=y97KT98vpJ0

I have also added a link below if you wish to purchase a new speed lever:

9709276 KitchenAid Tilt Head Stand Mixer Part (also 5qt bowl lift) Speed Lever Black https://secure.kaparts.co.uk/sku/9709276

I hope this helps you :)

KitchenAid KSM90... | Answered on Oct 17, 2019 | 175 views


Hiya,

I have added below some links of our help videos on replacing your tilt lever on your KitchenAid. I have also added a link to purchase a new tilt lever if you wish:

4176024 KitchenAid Lever-Latch Black was 9709280, 9709267 tilt https://secure.kaparts.co.uk/sku/4176024
https://www.kaparts.co.uk/Help/KitchenAidHelp/KitchenAidMixerHelp/ReplacingyourTiltHeadleveronyourKitchenAid/tabid/660/Default.aspx

https://www.youtube.com/watch?v=fTh56wwO-uY

I hope this helps you :)

KitchenAid KSM90... | Answered on Oct 04, 2019 | 1,401 views


Hiya,

I have added a link below on how to remove and replace your speed control speed lever:
https://www.kaparts.co.uk/Help/KitchenAidHelp/KitchenAidMixerHelp/Howtoreplacethespeedlever/tabid/643/Default.aspx

https://www.youtube.com/watch?v=y97KT98vpJ0

I hope this helps!

KitchenAid KSM90... | Answered on Aug 20, 2019 | 721 views


The Service Manual for your mixer can be found at:

http://www.kitchenaidparts.eu/documents/pdf/service-manual/classic-svc-manual-new-email-version.pdf

Among the causes for the mixer not turning on are (in no particular order) --

The leaf-spring switch on the Control Plate is not making contact.
The Phase Board is defective.
Brushes need replacement.
Brush chamfered side not correctly oriented.
Bad armature or field coil.
Seized motor bearing.
Detached or broken Control Board spring.
Speed Control Link plastic end broken.

KitchenAid KSM90... | Answered on Jan 18, 2018 | 276 views


You will find that the fuse gear has failed, it's either been overloaded or it's just worn out from use or maybe the lubricating grease has gone old and needs changing. That will be change the failed gear and replace the grease.

KitchenAid KSM90... | Answered on Jan 02, 2018 | 272 views


Kitchen Aid is 100% correct. The cause of the problem is age and lack of regular use, the oils in the gearbox grease separate from the solids over time and the oil then leaks out at the planetary and sometimes where the 2 case halves join under the silver trim band.
If you are up for a small job knock the chrome trim ring around the planetary off and clean it out and wipe around the area it covers. It is called a drip ring for good reason, you may find it full of oil.
The grease Kitchen Aid used in their mixers is Food Grade and it's harmless.

KitchenAid KSM90... | Answered on Nov 02, 2017 | 3,076 views


More likely the pedestal base is bent. Your local service agent has probably seen it before and should be able to bend it back flat again. It's a brutal process with a heavy soft hammer that you probably won't want to see.

KitchenAid KSM90... | Answered on Jul 25, 2017 | 412 views


There are several things that regulate the speed, we will assume that the adjustment has not been messed about with. If the governor on the motor armature that presses against the underside of the square black speed control plate at the back has not flown apart then I would replace the small pcb (phase board) on the top under the back cover. One screw and 4 wires hold it on.

KitchenAid KSM90... | Answered on Jun 23, 2017 | 346 views


The head bounce sounds as if the locking hook is not engaged properly when you slide the head-lock lever to the locked position.

If this is the case, you will need to disassemble the mixer to make sure the link from the lever to hook is not bent. Another possibility is that the slot in the base the hook engages. If this is broken away, the hook will not be able to hold the head in place (I sure hope that this is not the problem).

The Service Manual can be found at:

http://www.kitchenaidparts.eu/documents/pdf/service-manual/classic-svc-manual-new-email-version.pdf

KitchenAid KSM90... | Answered on Apr 28, 2017 | 558 views


Just recheck that you really have put the brushes back in the right way, use a torch and look in the hole. The brushes can each go in 4 ways, only one of which will work. Look for the blocker and line it up with the cut off corner on the brush. It's normally at the back, one side at the top the other at the bottom. After that you need to be looking at everything you have done for a booboo. I doubt it will be water ingress. Make sure the switch contacts come together when the lever moves to position 1.

KitchenAid KSM90... | Answered on Mar 18, 2017 | 344 views


www.kitchenaid.eu

KitchenAid KSM90... | Answered on Nov 05, 2015 | 208 views


Solution for these KitchenAid Stand Mixer Models
  • KitchenAid Stand Mixer Service Manual - K45SS
  • KitchenAid Stand Mixer Service Manual - K5SS
  • KitchenAid Stand Mixer Service Manual - KP50P
  • KitchenAid Stand Mixer Service Manual - KSM50P
  • KitchenAid Stand Mixer Service Manual - KPM5
  • KitchenAid Stand Mixer Service Manual - KSM5
  • KitchenAid Stand Mixer Service Manual - KPM50
  • KitchenAid Stand Mixer Service Manual - KSM75
  • KitchenAid Stand Mixer Service Manual - KSM90
  • KitchenAid Stand Mixer Service Manual - KSM103
  • KitchenAid Stand Mixer Service Manual - KSM110
  • KitchenAid Stand Mixer Service Manual - KSM150
  • KitchenAid Stand Mixer Service Manual - KSM151
  • KitchenAid Stand Mixer Service Manual - KSM156
  • KitchenAid Stand Mixer Service Manual - KSMC50
Fix KitchenAid Stand Mixer Workshop Service Repair Manual Download

KitchenAid KSM90... | Answered on May 15, 2015 | 1,414 views

Not finding what you are looking for?
KitchenAid KSM90 Ultra Power Series Stand Mixer Logo

348 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...