20 Most Recent KitchenAid KEMC377K Convection / Microwave Oven - Page 6 Questions & Answers


Pulled up a schematic on this will try and help the first pic looks as though you removed the secondary switch the bottom one if so that is the wrong switch it should be a normally open switch that one is normally closed this switch goes up top on the other side of the primary switch the one with 3 terminals, look at the second pic the switch with 3 terminals that red wire in the wrong spot the skinny orange goes there the switch I just told you to put up top the red goes to one terminal the white and brown middle form the 3 terminal goes to the other terminal, the blue/white and blue go to the bottom switch this is a normally open switch if you don't know how to read a switch look at the switch look at com follow the line to where it stops if it is NO=normally open, NC=normally closed your primary switch is in the right spot you want the switch next to it to be NC and the bottom switch NO it blew the 20 amp fuse once you correct the switches and wiring and put in a new fuse if you have no power then it blew past the fuse and burnt out the filter board happens some times about 60 bucks let me know if this helps

KitchenAid... | Answered on Dec 02, 2015


check manual and do

KitchenAid... | Answered on Aug 13, 2015


some circuit problem

KitchenAid... | Answered on Aug 13, 2015


Sarah,
That model number is not coming up as a good number, but another model that I looked at said that particular model was a 900 watt microwave.

KitchenAid... | Answered on Aug 08, 2015


you will need to replace both hinges.

KitchenAid... | Answered on Jun 27, 2015


really a good probability it is defective .

KitchenAid... | Answered on Jun 27, 2015


When unplugging it for half a minute or so (this should reset all settings) won't help, it must be defect. When you are convinced you did press the right buttons and you are in the correct program you don't need to unplug. But for that you have to be sure it is not switched to oven. In 30 seconds it won't be warm enough to heat your coffee

KitchenAid... | Answered on Mar 10, 2015


Common cause of this problem is transformer fuse blown.check the fuse.if fuse is ok, then replace magnetron

KitchenAid... | Answered on Mar 02, 2015


Should be one of these. I expect manuals have specs. Cut and paste into your browser address line.

http://www.kitchenaid.com/webapp/wcs/stores/servlet/OCManualsLiteratureSearchResultView?catalogId=10552&langId=-1&storeId=10202

KitchenAid... | Answered on Mar 01, 2015


moisture in electrical components, cables, construction, call customer support.

KitchenAid... | Answered on Feb 25, 2015


This is not a fun one if you take a putty knife and go in between the outer door and frame you can release the outer door cover hears the catch over time the door frame becomes brittle so there is a 50/50 chance the frame will break trying to separate it

KitchenAid... | Answered on Feb 19, 2015

Not finding what you are looking for?
KitchenAid KEMC377K Convection / Microwave Oven Logo

52 questions posted

Ask a Question

Usually answered in minutes!

Top KitchenAid Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9179 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Are you a KitchenAid Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

KitchenAid Microwave Ovens

  • KitchenAid Microwave Ovens

Most Popular Question

loose microwave door

  • Microwave Ovens
Loading...