20 Most Recent
Krups Fresh Aroma 625 Coffee Maker - Page 6 Questions & Answers
Error code OA on Krups EA8080
OA means that the sensor is not detecting any heat in the boiler. That means either the boiler is not heating or the sensor or sensor wire is detached from the boiler or the sensor has failed. The sensor is located behind the front display panel stuck in the front of the boiler and it has 2 thin wires in it with push on terminals.
Expresso machine screw on lid leaks steam
The valve in the lid is faulty, it will eventually fail completely. The correct lid can be ordered from your local Krups service agent. Be prepared for disappointment though as many of them are now obsolete. You will need to give the agent the model number, it's normally on a sticker on under the base.
Algu?m possa responder erro c?digo 9 krups xp7220
O sensor de temperatura na parte frontal da carca?a da caldeira (atr?s do painel frontal) n?o est? detectando nenhum calor na caldeira. Freq?entemente ? o borne de terminal desconectado do sensor ou o sensor inteiro n?o est? mais preso na caldeira. A solu??o da Krups ? para substituir a caldeira completa, mas no passado, eu revendi o terminal de volta ou colei (com cola resistente ao calor) o sensor de volta para a caldeira.
Hello, i have a krups xp7220 and i have two problems with her.
A common place for a leak under the machine is the barista seal that goes in the bottom of the boiler around that eject rod. Barista seal part number is MS5002202, Seals on the tamping piston are MS5002040 (there can be 1 or 2 of these piston seals) If fixing the leaks does not fix error 6 then I expect it will end up being the distributor. Part number MS2A01500
Error code E3
Probably going to depend on the model, ask another question and include the model number in the subject line to attract maximum attention
What does Krups EA9000, code 2 mean?
That info is not supplied via the normal service centre channels. Take it to an Authorised Service Centre and if they have not seen it before they will contact Groupe SEB to find out what needs doing.
Not finding what you are looking for?