20 Most Recent Bradford White Bradford MI30T6FBN-337 30 Gallon Wa - Page 8 Questions & Answers

https://www.youtube.com/watch?v=Uk_htzQKHMQ

Clean the flame sensor

This is not a DIY you need to call for service. this is user non repairable and there is no magic mouse milk 62 i s Maximum Number of Retries Detected 63 is Maximum Number of Ignition Recycles Detected

Google it!

I had the same problem. There's another clear rubber pipe underneath, that runs from the front right to a pump in the middle. I had to pull it off and dry it with a hairdryer before mine would light properly. Blast into the hole the pipe came off too to dry the sensor if there is one.

Check breaker

Go to intertherm website and inquire there

It does that with weak batteries - try replacing with fresh batteries.

here's their site if you can find the model and serial # Hope this helps a little. https://centralboiler.com/support/

Could either be a tripped breaker or the heating element has gone bad.

Call for service, You may have to replace heater. On the bottom is a flame arrester and it may be damaged. They are a one time use.

Go to the manufacturer's website and enter your model number and click on "Support" and there should be a FAQ's, Owners Manual or other support options for you. Otherwise the website may have a "Contact" phone number to call or a way to Chat online.

Search online for "appliance parts" and choose a website for that. You will be asked the model number of the heater and then a list of available parts will come up for you to choose from. I order from RepairClinic.com or APDepot.com and they both often have a video of how to make a repair as well.

it has something to do with ignition ,gas supply, ignitor

Unless you are licensed to work on or repair boilers call a professional. You will spend more in time and money trying to fix it, and finding a supply house that will sell you boiler parts. You could seriously injure yourself or someone else, boilers run very hot and are rated a pounds steam which is dependent upon boiler pressure.

you need to google this or phone the makers

You will not win arguing with the gas company, just install vent in accordance with code, and

It sounds like the tank is leaking. Without the information as to where the leak is the only answer I can suggest is to replace it.

Just google Rheem and you can contact them on there site

You replaced the gas control valve thermostat, and still getting same error, then full troubleshoot walk through is needed top-to bottom using the service manual: http://waterheatertimer.org/pdf/Bradford-white-programmable-water-heater-manual.pdf