20 Most Recent Ambient Weather WS-1280-2 Dual Zone Wireless Advanced Weather Station with Temperature, Indoor Humidity and Forecast - Page 4 Questions & Answers

Mine did the same thing. To fix it I extended the tape all the way out. As I retracted the tape it started working. Try it and let me know if this worked for you.

From the specification list in your instruction manual; "-Software calibrated, no variable resistor adjustment". Therefore it self calibrates or it doesn't function at all because it is software run.

Question edited to add make name, which also happens to be mine! The easiest way is just to remove the batteries for 20 seconds. The manual as not good because it is made in China. Alarm Press the UP button on the back of the base unit to toggle the alarm on and off. https://www.google.com/search?q=taylor+1502+instruction+manual

Do you by chance still have your cd? I need to reload mine as well

http://www.whiteriverprep.com/vintage/bhvintage/bhTR550D.html

Whatever mystery tool you have, it is normally on a label somewhere.

You need to pair your outside sensors with the XC0400.

Press the "Down" button to toggle between Celsius and Fahrenheit. Press the "Up" button to turn the alarm on and off. For complete instructions on the Ultronic clock thermometer, see: https://pdfslide.net/documents/ultronic-clock-cl-266instructions.html

Open the manual. Press CTRL+F and type 'beeps' and press enter. There are 19 mentions. https://www.transcat.com/media/pdf/80vUserManual.pdf The continuity test features a beeper that sounds as long as a circuit is complete. The beeper allows you to perform quick continuity tests without having to watch the display. To test for continuity, set up the Meter as shown in Figure 4. Press E to turn the continuity beeper on or off. The continuity function detects intermittent opens and shorts lasting as little as 1ms. A brief short causes the Meter to emit a short beep. Was there a Diode in the circuit? A short beep sounds if the diode is good (< 0.85 V). A continuous beep sounds if the reading is ? 0.100 V. This reading would indicate a short circuit. The display shows "OL" if the diode is open. and also Enter MIN MAX recording mode. The Meter is locked in the range displayed before you entered MIN MAX mode. (Select the desired measurement function and range before entering MIN MAX.) The Meter beeps each time a new minimum or maximum value is recorded

HOW TO CALIBRATE SHEKEL MERAV 2000 WEIGHING SCALE

See if the videos help? https://www.google.com/search?q=Smart+Electrician+364-5015+install+battery ..

How did you fix it?

It's not clear what your question is.

This error E190 appears when there is excessive moisture. Open all the ports, battery compartments, etc., and dry the instrument well. After drying the error disappeared.

Hi, all electronic rotary laser levelers have an electronic calibration that you can do yourself, you just need to know the correct algorithm to control the buttons. Look here (https://laslev.com/reviews-laser-levels/firecore/automatic-rotary-laser-level-firecore-fre207r-servo/) for an example of this unit, it describes the entire calibration algorithm for the X-axis and the Y-axis. The buttons may be slightly different, but the principle is the same, I'm sure you can do it, there's nothing complicated there.

No, the potential is not great enough.

Hi Kyle, It is impossible to give you complete information without the Manufacturer name and the model number. My guess is that you are pushing the mode button and skipping through 5 sets of settings. when you see the "e" push the up and down and you will probably see this sequence "e,c,m,p" if so, (or similar), that will set your time zone to Eastern, Central, Mountain, or Pacific. The "d" is likely for the Daylight savings time, use the arrow when you see the "c" and if you see "d,s" those are for Daylight savings, and Standard. I really am "shooting in the dark" without a make and model #. Good luck. Steve

amazon has them

This is a very basic 2 button scale. https://www.google.com/search?q=salter+scale+manual Strangely, the manual is not showing up. https://www.google.com/search?q=salter+2006+Microtronic+manual Very easy to use. Left button is imperial or metric. Right button is on and off and tare. Batteries for in a compartment underneath. What else do you need to know.

Spray the bearing with Jigaloo which is a dry silicone lubricant. If you can strip it down a bit, so much the better. https://www.jigaloo.ca/ ..