20 Most Recent Danco 89448A Universal Toilet Tank Lever, Chrome with White Porcelain Handl - Page 9 Questions & Answers

no info generic answer --a socket on a pipe --open end wrench --ratchet open end claw wrench --remove parts to access valve unit

I am not a service professional, but just a homeowner who has some experience with this gas log. GAS LOG INSTRUCTIONS Brand: Marco Gas Log (company is now out of business) #792775, unvented gas log Installed late 1990's when house was built The gas is turned on and off using the key on the wall to the left of the fireplace. The gas is OFF when the key is turned as far clockwise as possible. Turn the key counterclockwise about a half turn or whole turn (180 degrees to 360 degrees) to light the pilot and turn on the log. You don't have to worry about gas coming out into the room before you light the pilot, or if the pilot goes out. Horizontal as far clockwise as possible = OFF Vertical ½ turn = ON The log needs to be cleaned before using at the beginning of the season. Remove the logs, taking note of their position so you can replace them the same way. Use a toothbrush to clean the thermocouple, which looks like two little wires immediately to the right of the pilot (which looks like a metal tube that is located in the center just in front of the back log). Use a vacuum cleaner hose and duster to clean dust off all metal parts and the fire box interior. You can go ahead and replace the back log before lighting the pilot. HOW TO LIGHT THE PILOT: With the gas turned on with the key on the wall, find the black and white knob on the lower right of the gas log and turn it all the way to the right (clockwise) to the to the right as far as it will go, then turn it back ever so slightly to the left until you feel a little resistance (like a click that you feel rather than hear). The pilot cannot be lit when turned all the way to the right. Push the knob in with your thumb and use your other hand to light the pilot with a long-stem lighter or match. Hold the knob in for at least 30 seconds. The thermocouple has to be hot before the pilot will stay on. Let the knob come out very slowly. Hopefully the pilot will remain lit, but if it does not, you will need to repeat the procedure until it does. Be sure to hold the knob in until the thermocouple is hot and release the knob very carefully. When the pilot stays lit, then turn the knob to the left counterclockwise until the flame stays lit and carefully place the logs back into their original position. Note: Push the knob in only when you are actually lighting the pilot, not while you are turning the knob. Set the thermostat from Hi to Low as pictured on the knob. Once the log is lit, it should stay on until the thermostat causes it to go off. Hopefully the pilot will stay on so that the log will come back on automatically according to the setting of the thermostat (from low to high). It will be at its hottest when the knob is all the way counterclockwise.The flame will go off and on according to the temperature in the room. The pilot should stay lit even when the main flame goes out, as shown above.

Question edited for clarity, and add MAKER, so few words, so many spelling mistakes! Lithium batteries aren't rechargeable. Your small round CR2032 battery lasts 8 years. It is the same battery in a computer motherboard and easy to find in any pharmacy. REPLACING 3V LITHIUM BATTERY The Auto-set time memory is maintained by a lithium button cell battery, model CR2032. The expected life of this battery is about 8 years. Be sure that the 2 "AA" batteries in the clock are fresh. The MODE switch (8) must be in the RUN position when replacing this button cell battery. This battery is located in the small round battery compartment on the rear of the clock secured by a screw. Open the battery compartment (3) with a screw driver and replace the CR2032 lithium battery observing the polarity. Then close the compartment securing with the screw. https://cdn.shopify.com/s/files/1/0035/7443/1790/files/40222s-40222b_1.pdf?v=1594066127 ..

not a CAR so moved yah/ FEBO Flame Electric Fireplace real name is this. contract the maker , we are not them,

This is the striplight for it. It should last years. https://www.amazon.com/Replacement-Clairol-Makeup-Technical-Precision/dp/B08L9S3K2M Nothing shows how, but it has to be easy. I would guess accessed from the back. https://www.google.com/search?q=Clairol+true+to+light+V11+how+to+replace+bulbs ..

use this link to see: http://www.medicinenet.com/image-collection/bedbug_bites_picture/picture.htm

It is possible that the head section of your Invacare bed is not able to raise to a 90-degree angle due to a mechanical issue with the bed. It could be due to a problem with the motor or gears that control the movement of the head section, or it could be due to an issue with the electrical components that power the bed. You should check the following things:

1. Check the bed's remote control to ensure that it is functioning properly.
2. Make sure that the bed's power cord is securely plugged into the outlet and that the outlet is working properly.
3. Check the bed's battery level, if the bed has a battery backup.
4. Make sure that the bed is not locked in place or that the manual lock is not engaged.
5. Check that all the bed's connections are secure, and all the bed's cables are properly plugged in.

If none of these solutions resolve the issue, it may be necessary to contact the manufacturer or a healthcare equipment repair service for further assistance.

To pair/sync a second remote switch to an existing Intertek 3177973 receiver, you will need to follow these steps:

1. Turn off the power to the existing fan/light unit by switching off the circuit breaker or removing the fuse.
2. Locate the "learn" button on the receiver. It is usually located on the back of the receiver or the control box.
3. Press and hold the "learn" button on the receiver until the LED light on the receiver starts flashing.
4. Press the "on" button on the new remote switch for about 5 seconds. The LED light on the new remote switch should start flashing.
5. Release the "on" button on the new remote switch. The LED light on the new remote switch should stop flashing, and the LED light on the receiver should stop flashing.
6. Test the new remote switch to make sure it is controlling the fan/light unit properly.

7. Turn on the power to the existing fan/light unit. It's important to note that these steps are general guidelines, and the specific steps may vary depending on the model of your Intertek 3177973 remote control unit. Consult the manual for the specific steps and precautions before pairing or syncing on your remote control unit.

To calibrate a digital scale, you will need to follow these steps:

1. Find a weight that you know the exact weight of, such as a coin or a small weight. This weight will be used to calibrate the scale.
2. Place the weight on the scale and wait for the scale to stabilize.
3. Check the weight displayed on the scale. If it is not accurate, use the scale's calibration function to adjust the scale to the correct weight.
4. To calibrate the scale using the calibration function, follow the instructions in the user manual for your specific scale. The process may vary depending on the make and model of the scale.
5. Once the scale is calibrated, remove the weight and test the scale by weighing an object of known weight. If the scale displays the correct weight, the scale is properly calibrated. If the scale is still not accurate, you may need to repeat the calibration process or consult the user manual for further instructions.

I hope this helps! If you have any further questions, don't hesitate to ask.

It appears to be Australian and we are in North America. This link may work better for you. If you have another computer, perhaps at work it will play DVDs. https://www.google.com/search?q=Nutrimax+oil+core+skillet ..

To remove the comma from the price, you can use a string manipulation function such as replace(). Here's an example of how you can use it in Python: Copy code price = "21.36" price = price.replace(",", "") print(price) # Output: "2136" This will replace all occurrences of the comma character with an empty string, effectively removing the commas from the price. You can also use this function to remove the decimal point, if desired. For example: Copy code price = price.replace(".", "") print(price) # Output: "2136"

have seen some nursery rhymes musical figurines http://www.themusicboxcompany.com/baby_children.htm#nurseryrhymes scroll down to nursery rhymes

have you checked/replaced batteries. Be sure to install correctly. You can call Tempurpedic or the store sold it to you for more help.

Night Lights with replaceable bulbs have been superseded by LED Units. They last forever and use far less electricity and are auto sensing for night and day. Check out the 100 Lumen GE Light Bar if you want 'bright'.. https://www.google.com/search?q=LED+plug-in+Night+light ...

Hi, Please detach all non-essentially accessories from your tv before turning it off and on from the remote. If the issue persists, please power cycle your tv (ie unplug for 30 seconds and then replug). Please check multiple channels to see if the issue persists. If so, you can then reach out to your tv-channel provider to ask if there's a local service-loss in your area that is being worked on currently. Thank you.

It sounds like you are experiencing some unusual behavior with your tankless water heater. There could be a few different factors contributing to these issues. One possibility is that the temperature sensing and control system on your tankless water heater is not working properly. This could be caused by a problem with the thermostat or other components of the temperature control system. Another possibility is that there is an issue with the flow rate of the hot water being delivered to your shower. If the flow rate is too low, the water may not have enough time to heat up properly, resulting in cold water being mixed with hot water. It's also possible that there is a problem with the plumbing in your house, such as a blockage or a leak, which is causing the water temperature to fluctuate. To troubleshoot these issues, you may want to start by checking the thermostat and control system on your tankless water heater to make sure it is functioning properly. If the thermostat appears to be working correctly, you may want to try adjusting the flow rate of the hot water to see if that helps stabilize the water temperature. If these steps do not resolve the problem, it may be necessary to call a plumber to diagnose and fix the issue. I hope this helps! If you have any further questions, don't hesitate to ask.

It sounds like you may have a problem with the internal plumbing of your shower unit. The filter at the bottom of the unit may be clogged, or there may be a problem with the valve that controls the flow of water to the shower head. To troubleshoot this issue, you could try the following steps:

1. Check the filter at the bottom of the unit for any debris or clogs. If the filter is dirty, clean it out and see if that helps stop the dripping.
2. If the filter is clean, try shutting off the water supply to the shower and then opening the valve that controls the flow of water to the shower head. This will allow any excess water to drain out of the unit.
3. If the dripping persists after these steps, it may be necessary to call a plumber to diagnose and fix the problem. It's possible that there is a problem with the internal plumbing of the unit that will require professional repair.

I hope this helps! If you have any further questions, don't hesitate to ask.

Yes, it is possible to solder the wires for a splice on a oven temperature sensor that has a melted connector. Soldering is a common method for making electrical connections, and it can be used to repair a melted connector on a oven temperature sensor. To solder the wires for a splice on a oven temperature sensor, you will need the following tools and materials:

• Soldering iron
• Solder wire
• Wire stripper
• Heat-shrink tubing (optional)

Here is a general outline of the process:

1. Gather your tools and materials.
2. Cut off the melted connector from the oven temperature sensor.
3. Strip the insulation from the ends of the wires.
4. Twist the wire strands together to create a solid connection.
5. Heat the soldering iron and apply a small amount of solder to the wire connection.
6. Allow the solder to cool, and then apply heat-shrink tubing over the connection (optional).

It is important to follow proper safety precautions when soldering, including wearing protective eyewear and working in a well-ventilated area. If you are not comfortable soldering the wires yourself, you may want to seek the assistance of a qualified technician or engineer.

Question edited for clarity. How do you Synchronise a Westminster chime clock? Set the time by moving the big hand forward, pausing at the 11 o'clock position. Listen for the subtle sound of a spring unwinding before moving further. Move the big hand to the 12 o'clock position. Pause and listen for the clock to strike the number of times indicated by the little hand.

How to Reset the Time and Resynchronize the Chimes on an ...

https://www.wikihow.com > ... > Home Decor > Clocks More here Search for: How do you Synchronise a Westminster chime clock?