20 Most Recent Bosch CST Berger MagnaTrak 200 Series Magnetic Locator - No. 19-200SC Questions & Answers

Likely the on/off button is no longer at the right position to make contact with the tab. Take it apart, and you may need to glue a little piece of plastic to the button.

Bosch CST Berger... | Answered on Nov 26, 2014

Yes, you have to measure up from the line it gives you. It gives you a precise level so mark it and then measure up (or down) from it.
Or place the tripod on a table or something to get to higher position.

Bosch Measuring... | Answered on Sep 08, 2011

I had the exact same problem and after messing around with it for about half an hour I realized that the cord was the problem, I was kind of moving it around while plugged in and if I hold the end of the cord in a certain direction it works like it should. If the results are the same for you, I suggest either getting a replacement cord or just do the not so reliable option and tape the cord into place.

Measuring Tools... | Answered on Jan 17, 2021

It is a known issue

Try first a general reset:
- remove the batteries from the clock (thus turning it Off.)
- remove the batteries from the outside sensor (if you are not aware that it has batteries, then perhaps it is not working because the batteries are no good any more! check that also.)
- wait 10 minutes with no power to the device.
- put batteries back in, power On again.
- hit Reset.
- hit Receive button.
- change the channel for reception from the outside sensor.
- change the channel on the outside sensor to match that channel.
- then set the time once more, once the remote temperature is sensed once again.

If this does not get the outside temperature reading working again, you may have to replace that temperature sensor.



Measuring Tools... | Answered on Jan 02, 2021

It is a wired system (outside unit to the indoor phone) and only available in South Africa. This seems to be the distributor and there is no manual online. The are far better systems with colour video, audio and wifi or bluetooth.



Measuring Tools... | Answered on Dec 30, 2020

Try removing all batteries, then reinstalling in the outdoor unit and waiting for it to start sending data before reinstalling batteries in the indoor unit. If you don't see data displayed on the indoor unit, the outdoor unit may have failed.

Measuring Tools... | Answered on Dec 24, 2020

Not finding what you are looking for?
Bosch CST Berger MagnaTrak 200 Series Magnetic Locator - No. 19-200SC Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Measuring Tools & Sensors Experts

Brad Brown

Level 3 Expert

18564 Answers


Level 3 Expert

85239 Answers

Tom Chichester

Level 3 Expert

61131 Answers

Are you a Bosch Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Measuring Tools & Sensors

  • Bosch Measuring Tools & Sensors

Most Popular Question

cst berger magna trak 202 magnetic

  • Measuring Tools & Sensors