20 Most Recent Whirlpool 2 Person Corner Air Tub By Vitabath Bathtubs Questions & Answers

These tubes are just pushed on by hand. They are nothing special. If you need to replace them, just use whatever works. Push the ends firmly onto the small stems on the motor and the button. Good luck

Whirlpool 2... | Answered on Oct 27, 2014

epsome salts are only used for bath salts ,there is no harm.

Whirlpool 2... | Answered on Dec 30, 2010

clean it with a cleaning solution sold at lowes in the plumbing dept.

Whirlpool 2... | Answered on Dec 06, 2010

if u buy any small tub it can other wise it cant :( sorry i guess you can think that ! :)
4rm : x_crystala_x

Whirlpool 2... | Answered on Jul 03, 2010

check the reset button near the pump

Whirlpool 2... | Answered on Jun 26, 2010

need to test motor may be overheating or burnt up pump

Whirlpool 2... | Answered on Apr 03, 2010

call me 301 659 9968 i will explain

Whirlpool 2... | Answered on Oct 31, 2009

with dry feet, turn off the circuit breaker.

Whirlpool 2... | Answered on Aug 03, 2009

the blower should be matched to the number of holes and diameter of the hole. there is a pretty precise science to the whole Air Tub product. if the blower is too large it will burn up and if it is too small you won't get the true benefits that an Air Tub offers.

Whirlpool 2... | Answered on Feb 24, 2009

you wiil need to check 2 things.First you will need to check the motor.Their should be a reset switch on the motor.also attached to the power buuton is ablack thin hose if this hose came off the switch or motor than the motor wont come on.Look around for an access door .If thier is acloset in an adjoining room you might find it thier.

Whirlpool 2... | Answered on Feb 02, 2009

every motor has a frame size and horsepower listed on it. search for a new one that way. i would think since its driving a pump it will need to be a totally enclosed/driproof model

Whirlpool Home | Answered on Nov 10, 2020

So this happened 6 weeks ago. If I read between the lines, I will assume that you may have just acquired this house a short time ago.

And since you are talking about an "air switch", I will assume this is an air tub.

Air tubs are designed to turn the air blower on in a pre-determined time after the water has been drained. This function blows out the remaining water in the lines and jets to reduce water accumulation and bacteria buildup.

I hope this is helpful

Whirlpool Home | Answered on Oct 12, 2019

Did you turn the outer rings on the jets? They could be turned off. They are used to adjust the bubble flow, but also to turn them on or off.

Whirlpool Home | Answered on Jan 20, 2019

You have some bacteria build up on the inside of your tubing of the tub.
Try some cleaning solutions per directions on the bottle of tub cleaner made specifically for this situation.
Cleaning Solutions

US Parts Center

Whirlpool Home | Answered on Sep 23, 2018

I have galbocca jet tub which is no longer working. I live in Lawton, ok. No one works on them here. Any suggestions?

Whirlpool Home | Answered on Sep 21, 2018

Check breaker and reset switch.

Whirlpool Home | Answered on Sep 06, 2018

Not finding what you are looking for?
Whirlpool 2 Person Corner Air Tub By Vitabath  Bathtubs Logo

12 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Home Experts

john h

Level 3 Expert

23515 Answers


Level 3 Expert

4372 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

35841 Answers

Are you a Whirlpool Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Whirlpool Home

  • Whirlpool Home

Most Popular Question

safely use epsom salt in jet tub

  • Home