20 Most Recent Honda EU6500iS Inverter Generator - Page 8 Questions & Answers

PDF]SERVICE MANUAL - Electric Generators Direct

associated with operating your NAC portable generator, following the precautions listed below will assist you in .... For detailed engine information, refer to the Honda Engine Shop Manual. Note: ? ..... (e) Do NOT remove the diodes or de-solder the wires attached to the diodes. (f) Ensure you have ... NDK-4100YE. WIRING ...

Honda Electrical... | Answered on Aug 04, 2015

if the motor engine is working and no power output then you need to check is there any power out from the generator motor directly (not in the power out put box I hope you already checked in there) generator motor coils could have busted due to over loads. so even the engine is rotating the generator it can't produce any volts.

Honda Electrical... | Answered on Jul 31, 2015

take it to a generator repair shop as there are associated risks if you do it your self

Honda Electrical... | Answered on Jul 21, 2015

You can check the AC unit, it will tell you how much electricity it needs. Likely 15 or 20 amps. That's about 1500 or 2000 watts. What does your generator supply?

Honda Electrical... | Answered on Jun 24, 2015

Couldn't find anything on that model number other a control box.

Assuming your in the USA output frequency would 60 hertz under load so 65 hertz would be find; although, engine is running close to 3900 rpm when it should be around 3750 rpm unloaded which would be 62.5 hertz. As the output voltage being low it is probably the AVR (automatic voltage regulator) that is the problem.

Honda Electrical... | Answered on Jun 03, 2015

Usually on the power board under a black grub screw which you should be able to undo by hand.

Honda Electrical... | Answered on Apr 22, 2015

How To Diagnose Repair Generator With No Spark Ignition Module Replacement

Honda Electrical... | Answered on Mar 29, 2015

General rule of thumb for point gaps.
25 thou.
Hacksaw thickness
Should work fine.... it's not a precision machine?

Honda Electrical... | Answered on Mar 06, 2015

Use the name plate information on the engine to identify the make and model of the engine. You shuld then be able to look up the engine specs on-line.

Honda Electrical... | Answered on Mar 02, 2015

Check if you have power on each leg, l1 and l2 coming off the stator before the breaker. If you have only one leg then the stator is suspevt. if you have zero, check stator resisitance and shorts to ground, rotor the same, and voltage regulator and or capacitor

Honda Electrical... | Answered on Feb 28, 2015

Intake 0.15 +/- 0.02mm ( 0.006 +/- 0.001in )
Exhaust 0.20 +/- 0.02mm ( 0.008 +/- 0.001in )

Usually done with the engine cold/

Honda Electrical... | Answered on Feb 24, 2015

Not finding what you are looking for?
Honda EU6500iS Inverter Generator Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Honda Electrical Supplies Experts

Sheldon Dedek

Level 3 Expert

912 Answers


Level 3 Expert

4372 Answers


Level 3 Expert

85239 Answers

Are you a Honda Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Honda Electrical Supplies

  • Honda Electrical Supplies

Most Popular Question

stops generating just idles

  • Electrical Supplies