20 Most Recent HP 5070-2583 & 5070-2584 Remote Control IR Receiver IR Blaser Cable Kit - Page 6 Questions & Answers


Hello
What is the exact fault to your HP FTV? Please get me some more details.

HP Televison &... | Answered on Mar 07, 2012


Hi,
It doesn't look high voltage block problem.
Can you post here snap of TV showing problem ?

HP Televison &... | Answered on Feb 27, 2012


use hp online help support

HP Televison &... | Answered on Feb 19, 2012


What is the exact model number to your HP Plasma display? What problems do you face with it? Please give me these details by Fixya comment box. OK

HP Televison &... | Answered on Feb 01, 2012


Hi Willianette nice to work with you here in fixya..

Actually that problem is usually have 3 causes its either Ysustain,logic/controller or XY board..But commonly need to replace it all that's why plasma TV is very expensive to repair..

I have some question for you to help me diagnose your TV..
  1. Do you have multimeter and know how to use it?
  2. Did you any electronic background?
  3. Did you measure the VS and VA voltage on power supply inside your TV..If that so what is the actual reading?
Please answer those questions to help me to fix your TV..
Regards,
Rossiel

HP Televison &... | Answered on Feb 01, 2012


Did it used to work and stopped? I'm ruling out the obvious, replacing the batteries. I would check the Device Manager to see if when you insert the mouse's receiver USB plug, that the device is recognized, and also the driver is properly working. I'm guessing you tried that already... Last resort I would open the mouse and look for any problems with the hardware, and also see if the USB plug is disconnected on the inside. It's also possible for a USB port to "burn up" the trace on the board. This happened to mine for the ports on the top and also thought it was my mouse. I found out that the USB port inside the computer on the top were shorting out the small circuit board. So What I did was remove the small circuit board for the USB ports, and solder in a jumper wire to bridge the gap that was burned out. The cause, dust. I recommend blowing out the case every 3-5 months while it is unplugged with either duster or a compressed air gun preferably. I hope this helps you.

HP Televison &... | Answered on Dec 19, 2011


See http://www.fixya.com/support/t6886053-took_m_raf95_mouse.

You just need to ensure the springs and wheel are housed correctly.

HP Televison &... | Answered on Oct 18, 2011


It looks as if you have to return it personally, and have them fix it. I saw nothing on the HP ID5220 DLP TV in the ballast lists. Sorry, man. Wish I could be of more help. Maybe someone else has a better site, or connections, that can help you. Your best bet is to get professional help with someone, like the company that manufactures the hardware.

HP Televison &... | Answered on Oct 09, 2011


its better to reformat you computer, did you try system restore? try to open your windows in safe mode by pressing F5 when windows is starting then backup your files and reinstall your windows.

HP Televison &... | Answered on Sep 03, 2011


Hi, thanks for using fixya..

The Optical Block probably needs to be replaced. This is a major tear down job and a very expensive
repair. Call HP center and see if they are willing to help with the cost of the repair and also to get a local Service out to confirm that it is a Optical Block problem.

I hope this helps,

HP Televison &... | Answered on Aug 17, 2011

Not finding what you are looking for?
HP 5070-2583 & 5070-2584 Remote Control IR Receiver IR Blaser Cable Kit Logo

0 questions posted

Ask a Question

Usually answered in minutes!

Top HP Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76416 Answers

Davit Mamyan
Davit Mamyan

Level 3 Expert

552 Answers

Ellen Tumey
Ellen Tumey

Level 2 Expert

176 Answers

Are you a HP Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Televison & Video

  • HP Televison & Video

Most Popular Question

greetings am technophobe trying connect

  • Televison & Video
Loading...