20 Most Recent Kohler BALLAD 25X22 Stainless Steel Kitchen Sink - 1-HOLE K-3258-1-NA Questions & Answers


cut hole smaller the the sink sizeso sink rest edges on countertop

Kohler BALLAD... | Answered on Aug 23, 2009


You would use rubbing compound -- same kind of stuff as used on autos -- there are different grits -- super fine on up, just like sandpaper. It'll tak a lot of rubbing. Probably good do a reasonable job with a buffer/etc. on a drill motor.

Kohler BALLAD... | Answered on May 07, 2009


Look up the Kohler 800 number. Their parts have a lifetime warranty and they will gladly send a replacement part.

Kohler Plumbing | Answered on Nov 06, 2019


I assume you mean the separate H/C valve body as opposed to single handle(bath/shower).
https://www.us.kohler.com/us/Taboret-t-handles/productDetail/product:417141/417141.htm?skuId=341208

There is one O ring just below threads of body.
k1-5ywlvxu2h1hgmzvnljvnapjw-2-0.png

Kohler Plumbing | Answered on Apr 22, 2019


First, your not going to like the solution. There really is no way to solve this on kohler faucets. Some companies make adapters but as far as I know kohler isn't one of them. Hopefully you can cut a hole in the drywall behind and put it where it should be, if not the marble comes back off.

Kohler Plumbing | Answered on Dec 26, 2018


Pop the cap off the faucet handle and tighten the screw under it.

Kohler Plumbing | Answered on Nov 15, 2018


If this is a tub/ shower valve, you installed the cart. upside down. Reversing it should solve the problem. You might have put it in according to instructions but the hot and cold might have been reversed when the valve was plumbed in.

Kohler Plumbing | Answered on Oct 08, 2018


replaces the tap washer or insert

Kohler Plumbing | Answered on Oct 08, 2018


The bottom half of the handle spins CCW to losses the handle from the body. You can then tighten the screw inside the handle.

Kohler Plumbing | Answered on Oct 08, 2018


There is normally a tag on one of the supply lines.

Kohler Plumbing | Answered on Oct 08, 2018


It takes new valve cartridges and sometime complete valve bodies. Call Kohler, it should be covered by their lifetime warranty. They are very good about service.

Kohler Plumbing | Answered on Oct 07, 2018


Go to thr Kohler website at

http://www.us.kohler.com/wheretobuy/index.jsp

and select the

KOHLER Genuine Parts Dealers

or the Buy Online KOHLER Genuine Parts option

Kohler Plumbing | Answered on Aug 23, 2018

Not finding what you are looking for?
Kohler BALLAD 25X22 Stainless Steel Kitchen Sink - 1-HOLE K-3258-1-NA Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Kohler Plumbing Experts

Mike

Level 3 Expert

4372 Answers

Bill Johnson

Level 2 Expert

306 Answers

Paul Carew

Level 3 Expert

3534 Answers

Are you a Kohler Plumbing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kohler Plumbing

  • Kohler Plumbing

Most Popular Question

size hole in new counter fit 25x22

  • Plumbing
Loading...