20 Most Recent Sharp R-408HS Microwave Oven Questions & Answers

If the unit does this the keypad area may be bad---cheaper in most cases to buy a new unit.

Thank you for visiting FixYa!

You can view your owners manual at the following website. It's in PDF format. If you need a PDF Reader you can download Adobe Reader for free.

If this information was helpful, please give me a big thumbs-up when you rate my answer. Thank you.
http://tiny.cc/fixya440

You can download your owner's manual here.

If you still need help, you can contact Sharp at 1-800-BE-SHARP (1-800-237-4277) or visit them online.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

The turntable system consists of the motor, the coupler, the turntable support with rollers, and the tray.

You can see and hear a video of how a turntable motor should sound when you rotate it by hand.

If yours is not set to be off via the control panel, and it won't rotate or it sounds like it's grinding, etc., you may have a bad motor or plastic coupler.

To replace either, you need to unplug power, then remove the bottom cover of the oven. In some brands, you have to cut the motor cover off with snips, then use a screw when reassembling it.

The best place to order Sharp parts is Tritronics. You can also call them at 866-779-5835

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Remove to cover, it's under there.

Your model weighs 41 pounds empty.

That - plus maybe adding another 8-10 pounds for safety - us what your installation needs to be able to handle.

I would think the average cabinet could handle that, but it may be better to add a small steel plate or large washer surrounding the mounting screws to help disperse the weight load.

The owner's manual describes the installation kit you can use to mount it in a cabinet or in the wall, etc. That may be helpful.

If you don't still have your manual you can download it here.

We're happy to help and we appreciate your thoughtful rating of our answer.

It sounds like you may have an intermittent door switch or loose door switch mount.

Does it work differently when you wiggle the door?

At our site, we have critical safety information, info on door switch diagnosis and replacement, and disassembly information.

See our listing here on FixYa: http://tinyurl.com/yzjozk

? de aproximadamente 600 watts. No entanto, ? importante notar que as informa??es espec?ficas sobre a pot?ncia podem variar ligeiramente dependendo do modelo exato e das condi??es de uso ao longo do tempo. Se voc? precisar de informa??es precisas sobre o modelo espec?fico que possui, recomendo consultar o manual do usu?rio ou entrar em contato diretamente com o fabricante.

I can send you the instruction manual for Sharp R-9H10. Please send your mail [email protected] is mine

Turn the microwave oven to the "On" position press "Stop/Clear" a few times -- the microwave should return to normal mode.

See page no 22 of manual. It may help KB6524PS_PK_PW.pdf (nationalservicealliance.com)

I hope you didn't run the microwave with nothing in the cavity, if you did, it will damage the magnetron. The turntable dishes do get hot depending on the quality of the glass used to make it. Heat is caused by impurities in the glass. If you run it with no food in the oven, the glass will try to absorb the energy with atastrophic results usually.

The thermistor has failed. Replace the thermistor with the Sharp approved type and part number.