Top 20 Samsung Ln32b360c5d Questions & Answers

Won't Power On

I show how I fixed a Samsung LN32B360C5DXZA 32" LCD TV that wouldn't power on after it was plugged into an outlet that was wired wrong.

on Nov 16, 2016 | Samsung Ln32b360c5d

1 Answer

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
Check the voltage that comes to the back-light inverter board; from the main power board. The absence of this voltage too can be the cause.

Samsung... | 199 views | 0 helpful votes

1 Answer

My samsung ln46b610a5fxza picture started to have magenta and green and red vertical lines appear on the screen and now they won't go away

The problem is the LCD panel went bad, it can't be repaired, you have to replace it.

Samsung LN... | 279 views | 0 helpful votes

1 Answer

One side of my tv gets dim and out of focus it is a samsung. At times it works fine

back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

Samsung LN... | 84 views | 0 helpful votes

1 Answer

How do I troubleshoot my Samsung TV? I have sound, but no picture.

Caps can fail with no outward signs. It takes a special meter to test them. Your set may have a back light inverter that powers the back lights. When it fails, the picture cant be seen, but you have sound, to check this look for a picture on the screen using a flashlight

Samsung LN... | 572 views | 1 helpful votes

1 Answer

My Samsung Tv modle LN46C600F3F has sound no picture, what could be wrong?

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/
To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced.

Samsung LN... | 238 views | 0 helpful votes

1 Answer

How do you stop flicking on model# LN40C500F3F

flicking or shutting down,i have the same tv,mine shuts down,it needs power supply,yours needs the control board,get one on ebay

Samsung LN... | 260 views | 0 helpful votes

1 Answer

How do I fix samsung LCD tv that will not turn on. Standby light keeps flashing but will not turn on

You can also replace the bad capacitors on the power supply board.

Samsung LN... | 515 views | 0 helpful votes

1 Answer

Increase brightness in samsung tv

Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis.
http://electronicshelponline.blogspot.com/
In some models of LCD TVS; the backlight inverter and its T'Con board will be a part of the panel itself, and will be a built-in type inside the LCD panel. If so, they can't be replaced. In this case; a panel replacement is the only repair. For some other models, the backlight inverter section circuit will be a part of the main power supply regulator [SMPS]. To such sets, the power supply section circuit too should be troubles hooted. Contact any service technician. The circuit will differ with models and versions.
Type in the brand name of your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Samsung LN... | 95 views | 0 helpful votes

1 Answer

Too bright/high contrast, unable to adjust. Tried to adjust from MODE: DYNAMIC, STANDARD, MOVIE=NOTHING, Tried-Background, Contrast, Brightness, Color, Tint, Gamma, Picture Factory Reset=nothing.

Fault with main board. Damaged component/s at it. Contact any service technician; or the authorized service center.If you wish to get some details; check the site linked here.Surf the site with patience.Pull up older posts.http://electronicshelponline.blogspot.com/ .In most cases, the main board might have to be replaced.If so, a software [firmware] update too might be necessary.

Samsung LN... | 195 views | 0 helpful votes

1 Answer

My samsung was hit by lighting.. the red light blinks a few times when i plug it in. and when i press power it blinks once. but will not turn on. i checked the two fuses inside and replaced them but i

Fault with main board. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/

Samsung LN... | 448 views | 0 helpful votes

1 Answer

Samsung TV won't turn on after lightening storm. Surge protector "sparked once, but all the other things plugged in are operating.

Contact your insurance company and make a claim. Lightning damage to electronics like that is hard to repair.

Samsung LN... | 257 views | 0 helpful votes

1 Answer

How to remove table stand from model LN40D630

Page 64 of the user manual explains this procedure.
Go to Global Download Center and under Manuals, click See More + and then click on Download PDF.

Samsung LN... | 224 views | 0 helpful votes

1 Answer

How do I fix my SAMSUNG LN52A750R1F tv powers on with no picture?

Check and replace damaged component/s at its backlight inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do a search by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/

Samsung LN... | 227 views | 0 helpful votes

1 Answer

Why dont i have a picture?

Hi, not sure if you have the same fault as i had, but our tv only had half the screen go off, after looking up on the internet i found a video for a fix, what you need to do is remove the back cover, there will be ribbons that go from the front screen to the main panel, i removed each one at a time and rubbed the contacts of the ribbon with a rubber on the end of a pencil, plugged them all back in and switched it on and it was now spot on, thats more than a year ago and its still working spot on, hope this helps
jim

Samsung LN... | 157 views | 0 helpful votes

1 Answer

Unqualified help.

hi did you put the capacitor in the right way round, the blue stipe on the cap is the negative, also what was the voltage? you can upgrade the voltage hope it helps

regards
shaun

Samsung LN... | 247 views | 1 helpful votes

1 Answer

Ln32d450g1d

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience

Samsung LN... | 243 views | 0 helpful votes

1 Answer

How to unlock parental control

You can view the attached link for information on your problem

Samsung LN... | 43 views | 0 helpful votes

1 Answer

No Picture just Sound Samsung Ln46C600F3F

You need a new smps. I can get you a part number if you will tell me the model, serial, and version #.

Samsung LN... | 425 views | 0 helpful votes

1 Answer

I have 46"samsung LN-4881f and I get no sound when I have My video game hooked up. what can I do to fix this problem?

Depending on the version of HDMI standard, it may not transfer audio. Add a dedicated audio cable from the video game to TV. there should be an audio jack next to the HDMI.

Samsung LN... | 126 views | 1 helpful votes