HiTi P110S PocketStudio Photo Printer Starter Kit - Answered Questions & Fixed issues
Shredder Essentials SES-C1525 Shredder. How do I unjam a ses-c1525 jammed with what I think is sticky gunk.
Question edited for full 'make model (what it is)'.
People don't realize that shredders need oiling regularly. Spray all the blades and the gunk with WD40. Leave it half an hour and spray it again. Run it in reverse to clear the jam. If you have been using it a lot, they have a thermal cut out which should reset after about 20 minutes or so. Bad jams and heat, shatter and shred the gears inside the head. Is the motor making any noise?
How to hook up my projector
For every projector ever made in the history of projectors?
All questions need full 'make model (what it is)'.
make model manual
Kangro HP-45 tray not lifting to create space for papers
If the paper tray on your Kangaro HP-45 stapler is not lifting to create space for papers, it could be due to a few different issues. Here are some steps you can take to fix the problem:
- Check the tray for any paper jams: If there is paper stuck in the tray or in the stapler mechanism, it could be preventing the tray from lifting. Carefully remove any paper or debris that may be obstructing the tray.
- Check the spring: The tray lifting mechanism in the stapler is usually spring-loaded. If the spring is damaged or worn out, the tray may not lift properly. Try replacing the spring with a new one.
- Check the lever: The tray lifting mechanism may be controlled by a lever or other mechanism. Check that the lever is properly aligned and not obstructed by any debris.
- Check the tray guides: The tray guides may be bent or misaligned, preventing the tray from moving smoothly. Try adjusting the guides to ensure that the tray can move freely.
- Check the tray stop: The tray stop may be preventing the tray from lifting. Check that the stop is properly aligned and not obstructed by any debris.
If these steps do not resolve the issue, it may be necessary to take the stapler to a professional repair technician for further diagnosis and repair.
How to find MAD on an fx-9750GII calculator
You can use the built-in MAD function on the calculator by following these steps:
- Press the "STAT" key and then select "5:Distribution". Choose "1:Statistical Calculations" and then "4:Other".
- Select "4:MAD" and then enter your data set.
- Press "EXE" to calculate the MAD.
Caster holder broken and won't auto-stop after shred
I see you posted two questions on the same issue, and the other one was disjointed with no indication what the caster wheels were on.
Check the switch, they normally have On, Off and Auto.
Remove the head and clean all paper debris from underneath. You have a small piece of paper over the sensor and it is sensing that there is still paper for be shredded. Some have a small lever and if so, yours is stuck. Spray with WD40, and all the blades as well.
The caster wheels could all be removed and have it sitting on its base. The wheels are for use if you keep it in an office cupboard. You just replace the whole caster wheel or the whole set for $14..
Have a Staples Model SPL-727MM paper shreader that
I am sure you have already solved it or moved on but johnd393's comment at https://www.fixya.com/support/t1766897-disassemble_mailmate_spl_727mm
To reach the screws in the tray drill 6 holes in the bottom plastic and use a really long screwdriver to access them.
I used a 12 inch uxcell #1 Phillips screwdriver, which also worked on the 2 long screw holes hidden under the feet. You could probably get away with 10 inch or a #2 Phillips but with #2 screwdrivers check the width of the shaft first as the screw holes under the feet were too small for the #2 I originally bought.
I have a problem with Riso SF5030, it shows error code P98-1061/ T98-1061. What maybe the problem
Error codes P98-1061 and T98-1061 on the Riso SF5030 indicate an issue with the color drum's motor. This error code usually occurs when there is a problem with the motor or the wiring that connects the motor to the printer's control board.
Here are some steps you can take to troubleshoot the issue:
- Turn off the printer and unplug it from the power source.
- Check the wiring connections between the motor and the control board. Make sure that they are secure and not damaged.
- Check the motor for any physical damage or signs of wear and tear.
- If you have a replacement motor, try replacing the faulty one and see if the error code persists.
- If the issue persists, you may need to contact a service technician to diagnose and repair the problem.
It's essential to note that opening up the printer's internal components can be dangerous, and you should only attempt these steps if you feel comfortable doing so. If you are unsure or uncomfortable, it's best to contact a qualified service technician for assistance.
Milnor commercial washer model # 30022T5X
The Milnor 30022T5X0 is a commercial washer that features a high-speed extraction system, low water usage, and a convenient front-load design. It offers a capacity of up to 25 pounds and can handle a variety of fabrics, including towels, sheets, and uniforms. The 30022T5X0 also features an energy-efficient design and an adjustable water temperature for better cleaning results.
Milnor commercial washer??
Yes, Milnor is a commercial washer manufacturer. They offer a range of equipment, including industrial and commercial washers. Their products are used in a variety of laundry applications and are designed to provide maximum efficiency, reliability, and performance.
Not finding what you are looking for?