Top 20
HiTi P110S PocketStudio Photo Printer Starter Kit Questions & Answers
Stop watermark popup before printing model ECOSYS P5026cdw
To disable the watermark before printing on a Kyocera ECOSYS P5026cdw model, you can follow these steps:
- Open the printer driver on your computer.
- Go to the "Advanced" or "Properties" tab.
- Locate the "Watermark" or "Overlay" settings and select "Off" or "Disabled."
- Click "OK" or "Apply" to save the changes.
- Try printing again and the watermark should no longer appear.
Please note that these steps may vary depending on your specific printer model and the software you are using. If you are still having trouble, consult the printer's user manual or contact the manufacturer for additional support.
Riso ComColor 7050 Error 0B31 - what do I do?
The 0B31 error code typically indicates that the cooling fan is not working correctly and needs to be replaced. Try to reset the fan and ensure the cables are securely connected. If that does not resolve the issue, the fan may need to be replaced.
My seca 813 only showing STEP OFF AND STOP massage cannot reset ??
If your Seca 813 is only showing the "STEP OFF" and "STOP" messages and is not responding to any commands, it is possible that there is a problem with the scale's sensors or the internal circuitry. Here are some steps you can take to troubleshoot the issue:
- Make sure that the scale is on a flat and stable surface. If the scale is on an uneven surface or is wobbling, it may not be able to take accurate readings and could display error messages.
- Check the scale's batteries. If the batteries are low, this could cause the scale to malfunction. Replace the batteries with fresh ones and try turning the scale on again.
- Reset the scale. Some scales have a reset button or function that can be used to clear any errors or malfunctions. Refer to the user manual for instructions on how to reset your specific model of scale.
- Check the scale's sensors. Over time, the sensors on a scale can become dirty or worn, which can affect their accuracy. Clean the sensors with a soft cloth or brush and see if this resolves the issue.
- If none of the above steps work, you may need to contact Seca support or a professional technician for further assistance. They may be able to diagnose the issue and recommend a repair or replacement if necessary.
Emerson coin sorter will not turn on. Need manual please
Greetings,
Please reach out to your local home hardware store over the phone to request the manual from them. Tey might also be able to request the manual from an Emerson representative for you. And it would be your choice to pickup the manual at the store or have it mailed to you.
Thank you.
MEMBERS'S MARK MICRO CUT/12 PULSES WHEN SHRERRING. WORKS GOOD IN REVERSE
If your Member's Mark micro cut shredder is experiencing a problem where it is making 12 pulses when shredding and works good in reverse, it is possible that there is an issue with the shredder's motor or transmission. Here are a few things you can try to troubleshoot the problem:
- Check the shredder's capacity: Make sure the shredder is not overloaded and that you are using it within its capacity. Overloading the shredder can cause issues with the motor and transmission.
- Check for debris: Look for any debris that may be stuck in the shredder's mechanism. Debris can interfere with the movement of the shredder's components and cause problems.
- Check for other issues: If the shredder is not overloaded and there is no visible debris, it is possible that there is another issue causing the problem. You may need to have the shredder serviced by a professional to diagnose and fix the issue.
I hope this information is helpful. If you have any further questions or need additional assistance, please don't hesitate to ask.
I have an error code 033001 on my xp-345
The error code 033001 on an Epson XP-345 printer typically indicates a communication error between the printer and the computer. Here are a few steps you can try to resolve this issue:
- Check the USB cable connection: Make sure the USB cable is securely connected to both the printer and the computer. If the cable is damaged or frayed, replace it.
- Restart the printer and the computer: Turn off both the printer and the computer, wait for a few seconds, and then turn them back on.
- Update the printer driver: Go to the Epson website and download the latest driver for the XP-345 printer. Install the driver on your computer and see if the error code 033001 has been resolved.
- Uninstall and reinstall the printer: Remove the printer from the Devices and Printers list and then reinstall it.
If the above steps don't resolve the error code 033001, you may need to contact Epson support for further assistance.
What size staples do I need for the Rapid Isaberg 16 stapler [prob 40/50 years old but still works superbly]
The Rapid Isaberg 16 stapler uses 26/6 size staples. These staples are also commonly referred to as "standard staples" and are widely available at most office supply stores or online retailers. They measure approximately 6mm wide and 11mm in length, and are compatible with a wide range of staplers, including the Rapid Isaberg 16. Be sure to use high-quality staples to ensure that your stapler functions properly and staples securely.
Milnor commercial washer model # 30022T5X
The Milnor 30022T5X0 is a commercial washer that features a high-speed extraction system, low water usage, and a convenient front-load design. It offers a capacity of up to 25 pounds and can handle a variety of fabrics, including towels, sheets, and uniforms. The 30022T5X0 also features an energy-efficient design and an adjustable water temperature for better cleaning results.
Milnor commercial washer??
Yes, Milnor is a commercial washer manufacturer. They offer a range of equipment, including industrial and commercial washers. Their products are used in a variety of laundry applications and are designed to provide maximum efficiency, reliability, and performance.
I have a problem with Riso SF5030, it shows error code P98-1061/ T98-1061. What maybe the problem
Hi!
Error codes P98-1061 and T98-1061 on the Riso SF5030 indicate an issue with the color drum's motor. This error code usually occurs when there is a problem with the motor or the wiring that connects the motor to the printer's control board.
Here are some steps you can take to troubleshoot the issue:
- Turn off the printer and unplug it from the power source.
- Check the wiring connections between the motor and the control board. Make sure that they are secure and not damaged.
- Check the motor for any physical damage or signs of wear and tear.
- If you have a replacement motor, try replacing the faulty one and see if the error code persists.
- If the issue persists, you may need to contact a service technician to diagnose and repair the problem.
It's essential to note that opening up the printer's internal components can be dangerous, and you should only attempt these steps if you feel comfortable doing so. If you are unsure or uncomfortable, it's best to contact a qualified service technician for assistance.
Regards
Rexel LV250HS Laminator stopped heating up. Can it be repaired.
Question edited for a lot more clarity which a guess at the maker.
Question moved from Microwave Oven.
It depends. If it is just a broken wire or a faulty switch, probably yes and easily. If the heating element has failed, getting spare might be the hard part. Start with checking the easy stuff with a multimeter.
Not finding what you are looking for?
