20 Most Recent HP Deskjet 3510 e-All-in-One Printer - Page 9 Questions & Answers

Change the settings from your computer when you go to print out a document.

HP Office... • Answered on Mar 28, 2020

Hard Reset:
  • With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
  • Remove USB cable, if present.
  • Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
  • Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
  • Turn on the printer and wait till warm-up period finishes and the printer is idle.

HP Office... • Answered on Mar 28, 2020

Adjust the paper tray by pulling the slider in the tray right to left.

HP Office... • Answered on Mar 28, 2020


HP Office... • Answered on Mar 26, 2020

How to troubleshoot hp error code problems below

HP Office... • Answered on Mar 24, 2020

Go to Control Panel - Devices and Printers. Right-click on Envy 4520 and select "Printing Preferences". Navigate to print quality / layout tab and make sure that the color printing option is selected. Save the settings and check for issue resolution. https://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/envy-4520-won-t-print-color/td-p/6429654

HP Office... • Answered on Mar 24, 2020

If the saved faxes have been cleared try reducing the print resolution to 600 dpi and check for any change. If there is still no change , try 300 dpi and try printing again.

HP Office... • Answered on Mar 18, 2020

download firmware from hp.com/support

HP Office... • Answered on Mar 16, 2020

59 errors indicate one of the motors have failed. It could be a bad motor but also a bad cartridge will overload a motor and cause the error as well. If you have spare cartridges, try changing them one at a time and restart between changes to see if the error goes away. Also if the error only happens when you start to print it might be the fuser motor.

HP Office... • Answered on Feb 28, 2020

Caution: Unplug the printer before attempting any maintenance procedures. The following is for information purposes only, and does not constitute endorsement of any products or services. https://www.laserprinterservices.com/hperrorcodes.html 13.5 Paper jam in the fuser https://www.youtube.com/watch?v=Zr_lJ7KuiB0 HP LASERJET 5200 PAPER JAM GANTI (FUSER FILM) Steps to remove the fuser to check for a paper jam.

HP Office... • Answered on Feb 25, 2020

Is the printer directly connected to a wall outlet and not to a surge protector?https://h30434.www3.hp.com/t5/LaserJet-Printing/Printer-is-on-but-the-display-window-is-blank/td-p/6212316

HP Office... • Answered on Feb 21, 2020

Dead formatter most likely.Not uncommon on this model.

HP Office... • Answered on Feb 20, 2020

Not finding what you are looking for?
HP Deskjet 3510 e-All-in-One Printer Logo

Popular Tags

97 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6259 Answers


Level 3 Expert

8092 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • HP Office Equipment & Supplies

Most Popular Question

print job stuck not deleting even shows

  • Office Equipment & Supplies