20 Most Recent HP Deskjet 3510 e-All-in-One Printer - Page 7 Questions & Answers


Check in your device manager list to uninstall any listed as not installed properly then rerun the setup program. Only plug the printer usb in when the program prompts you. The noise is normal as the printer is seting the head position and cleaning the print head, it is also running the rollers to check if there is a paper blockage or any paper in the load tray. I get to the device manager by using the explorer for windows files, then on the Left side where the hard drivers are listed right click on This PC, choose properties. A new screen will open that is labelled System. On the top left you will see Device Manager. Hope that helps :)

HP Office... • Answered on Jun 10, 2020


Printer Offline Error on the desktop screen shows that it failed to communicate with HP Officejet 3830 printer. The printer offline error mainly occurs due to a faulty driver, if you are facing any problem with your HP OfficeJet 3830, then you must follow these Steps to fix Officejet 3830 Printer Offline Error.

HP Office... • Answered on Jun 07, 2020


If your printer's status displays "Printer in error state," there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn't open and the paper isn't jammed

HP Office... • Answered on Jun 01, 2020


Usually, Error Code 0x07a74dd6 occurs when users try to start printing via connection to the computer. The Error Code 0x07a74dd6 could refer to anything from the product needing a basic reset to reinstalling the printhead or cartridges.

HP Office... • Answered on May 29, 2020


How to Completely Delete and Uninstall the HP Printer Deskjet Driver Software. HP printers ship with several printing applications and drivers. https://www.cpprinter.com/how-to-remove-and-completely-uninstall-hp-printer-deskjet-driver-software/

HP Office... • Answered on May 29, 2020


First, be sure all four toner cartridges are seated properly as is the transfer belt. Close the front panel, then the top panel, power-cycle the printer and try again. If that doesn't solve the issue, it sounds as if either the actuator for the front door switch is broken off (which is highly unlikely) or the door switch itself is out of position. Getting to the switch involves removing most of the panels just to get to it; not impossible, just involved and a LOT of screws, plus a small black spacer for the top-left panel hinge. If you have any kind of a warranty or maintenance agreement on the printer, DO NOT TRY THIS, you WILL void it!! You have to unplug the printer, remove the fuser from up top, then the top panel, lower the front panel and remove the transfer belt and keep it out of the way in a dark area. Remove the hinged rear panel at the rear bottom followed by the rear panel (which fits inside a side panel, something to remember when reassembling). Now the side panel. If the switch is out of position, reposition it. If it's broken, it will need to be replaced. Reassembly is in the EXACT opposite of disassembly. You may wish to forego this and get an HP authorized tech in to do this for you. Worst Case Scenario: the DC Controller board is bad. But that's also unlikely ... possible, but unlikely. Let me know how it turns out!

HP Office... • Answered on May 24, 2020


go to start menu, choose printer & faxes, click the printer icon properties and find the printer resolution to adjust the dark printing capability

HP Office... • Answered on May 24, 2020


HP LASER PRINTERS 2, 2D, 3, 3D 1. Defective cable laser scanner to dc controller. 2. Defective laser scanner assembly. HP LASER PRINTERS 2P, 2P+, 3P 1. Bad scanner motor. 2. bad dc controller. HP LASER PRINTERS 3SI, 4SI, 4V 1. Faulty cable assembly. 2. Scanner motor problem. 3. Defective laser scanner assembly. 4. Defective dc controller. HP LASER PRINTERS 4, 4+, 5 1. Faulty laser scanner cable. 2. Defective laser scanner assembly. HP LASER PRINTERS 4L, 4P, 5P, 5L, 5SI 1. Temporary error. Scanner startup failure. 2. Improperly fitted scanning assembly. 3. Scanner cable problem. 4. Defective laser scanner assembly. 5. Defective dc controller board. HP LASER PRINTERS 1200, 2200, 3100 FAX, 3200 FAX, 4100 1. Temporary error. scanner rotation error. 2. Replace contact image sensor. 4. Replace laser scanner. 5. Replace cables to laser scanner and engine board HP LASER PRINTERS 1100, 2100, 4000, 4050, 8000 1. Scanner start up error 2. Replace scanner cable to the D.C. controller and back to scanner. Or replace scanner cable from engine board to scanner ***'y. 3. Replace scanner ***'y. 4. Replace the engine board. 5. Replace the D.C. controller only on the 8000. HP LASER PRINTER 2300 ERROR 52.X 1. A temporary scanner start up error. 2. This can also be the shutter tab on the print cartridge. Replace the toner cartridge. 3. Replace the scanner ***'y. 4. Replace the engine board. HP LASER PRINTERS 4200, 4300 ERROR 52.XX 1. Printer scanner speed error has occurred. 2. Replace laser scanner ***'y 3. Replace the D.C. controller ***'y HP COLOR LASER PRINTER 4600, 5500 ERROR 52.XK, 52.XC, 52.XM, 52.XY 1. Error code K - No Black Color. 2. Error code C - No Cyan Color 3. Error code M - No Magenta color 4. Error code Y - No Yellow color 5. Replace laser scanner ***'y 6. Replace the D.C. controller ***'y HP LASER PRINTERS 5000, 5100 1. Printer scanner speed error has occurred. 2. Replace laser scanner ***'y 3. Replace the D.C. controller ***'y 4. Replace cable ***'y from scanner to D.C. controller. HP LASER PRINTERS 8100, 8150 1.Laser scanner error/start up/rotation error 2.Replace laser scanner ***'y. 3.Replace D.C. controller board. 4.Replace cable ***'y from scanner to D.C. controller HP LASER PRINTER 4500, 4550 1. Temporary error. Laser scanner error/start up/rotation error 2. Replace laser scanner. 3. Replace D.C. controller ***'y HP COLOR LASER PRINTERS 4600, 5500 1.Laser scanner error/start up/rotation error. 2.Take the toners out and reseat them, or replace them 3. Replace laser scanner ***'y 4. Replace D.C controller board. HP LASER PRINTER 8500, 8550 1. Temporary error. Laser scanner error/start up/rotation error 2. Replace laser scanner motor. 3. Replace D.C. controller ***'y HP LASER PRINTER 9000 1. Temporary laser scanner error/start up/rotation error 2. Replace laser scanner. 3. Replace upper cable guide assembly. 4. Replace DC controller.

HP Office... • Answered on May 24, 2020


1) Go to control panel->printer and faxes. 2) Right Click on the paused printer 3) Select resume printing.

HP Office... • Answered on May 24, 2020


Are you using genuine HP cartridges? According to HP, the two cartridges for your printer are the 564 and the 564XL. Either cartridge will work. HP does not offer another size. Take the black one out that's in there now and see what the Part # is... then do a search for it.

HP Office... • Answered on May 24, 2020


Here is the link given to the user manual. that contains the optimum solution to your problem and maximum guidance. http://www.devicemanuals.com/guide/All-in-One%20Products/HP/HP-PSC-950-All-in-One-Owners-Manual-==TVRFME56VTI=.html http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&prodClassId=-1&contentType=SupportManual&prodTypeId=18972&prodSeriesId=34579

HP Office... • Answered on May 24, 2020


01. Please check in number of desktops or laptops it connected. 02. Give proper IP Address in the Desktop or Laptop where it has to be orignally installed. 03. Being a network printer, lot of desktop or laptop users might have printing job iniated. 04. Right click the printer properties which is available bottom right hand corner ikon and delete or cacel all printing jobs. 05. The original desktop or laptop where the IP Address created will be rebooted. System should be restarted. 06. Try to print now to close this solution. 07. Still the problem persits, kindy contact local HP Authorised printer service engineer to set right this issue. Have a nice working day.

HP Office... • Answered on May 22, 2020


51.XY ERROR alternates with To continue turn off then on A printer error has occurred. X Description: 2 laser Y Description: 0 Black 1 Cyan 2 Yellow 3 Magenta Your error then comes from the magenta laser. The recommendations from the service manual are:
  1. If the message persists, turn the printer off and then on.
  2. Reseat DC controller connectors J1022, J1026, and J1027.
  3. Reseat laser/scanner unit connectors J101A, J101B, J5001A, J5001B, and J5020.
  4. Replace the laser/scanner unit as necessary.
  5. Replace the DC controller PCB as necessary.

HP Office... • Answered on May 22, 2020


If the machine is not too old and still supported by HP I suggest you go to their support site and download the trouble shooting software HP print and scan doctor https://support.hp.com/th-en/document/c03286146

HP Office... • Answered on May 22, 2020


Steps To Fix HP Printer is Displaying A 50.4 Error Message
  1. First thing you have to do is to cancel all the pending printing jobs in the queue.
  2. Now switch-off your printer and leave it for few seconds to cool it down.
  3. After cooling down the printer completely, the fuser failure error appears on the display screen.
https://www.hpprintersupportpro.com/blog/hp-printer-is-displaying-a-50-4-error-message/ https://www.laserprinterservices.com/hperrorcodes.html HP Printer Error Codes HP Laser Printer Error Code 13.4 paper jam 50.1 Bad Low Voltage Power Supply 13.5 Paper jam in the fuser 50.2 Fuser Error 13.6 Paper jam in the fuser 50.5 Fuser Error 13.20 jam in the paper feed drive 50.9 Fuser Error

HP Office... • Answered on May 21, 2020


https://www.hpsupport365.com/blog/hp-printer-install-wizard/ Installing an HP Printer in Windows Using a USB Cable
  1. Go to 123.hp.com, enter your printer model, and then follow the onscreen instructions to download your driver. ...
  2. Go to HP Customer Support - Software and Driver Downloads, enter your printer model, if prompted, and then confirm the operating system version is correct.
https://support.hp.com/us-en/document/c03521864

HP Office... • Answered on May 20, 2020


Open run or use ctrl+R type cmd press enter then type ipconfig in the cmd window thats it!

HP Office... • Answered on May 17, 2020


You sound as though you wish the printer to directly connect to the laptop via wi-fi. This is not usually the case in home networks. Most home networks use a wi-fi router to link all wi-fi components. This is because your laptop is not capable of handling the routing duties itself, nor is the printer (normally). The wi-fi router assigns the IP addresses that the devices use to communicate to the router and each other. That said, IF you ARE using a router, perhaps you are not entering the security code that the router needs to allow the device to attach to the network. If you are NOT using a router, then you still MIGHT be able to use the printer with the laptop if it has a "direct connect" capability. You would need to look at the printer documentation and instructions on how to set it up. Unfortunately, wi-fi isn't as simple as just turning it on an waiting for a connection to take place.

HP Office... • Answered on May 16, 2020

Not finding what you are looking for?
HP Deskjet 3510 e-All-in-One Printer Logo

Popular Tags

97 questions posted

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6261 Answers

k24674

Level 3 Expert

8092 Answers

Mike

Level 3 Expert

4376 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

HP Office Equipment & Supplies

  • HP Office Equipment & Supplies

Most Popular Question

print job stuck not deleting even shows

  • Office Equipment & Supplies
Loading...