20 Most Recent Sunbeam 200 Watts 2480 Hand Mixer - Page 3 Questions & Answers

If you are trying to remove the chrome cover from the black body of the mixer .... CAREFULLY.... insert the tip of a medium flat-blade screwdriver along the seam of the circular chrome disc on the front of the black motor housing. Move/rotate the screwdriver blade back and forth to pry the chrome disc off. It is on just by a pressure fit. Your photo was very helpful! I wish more people would do that!

Try manualslib.com

Look for a nearby dealer or repair shop. If that doesn't work, try http://www.goodmans.net/d/159/sunbeam-mixers-parts.htm

There is a cover plate over the screw that you need to tighten. This cover plate is held in place by two spring latches, 180 degrees apart. Use a small flat-tip screwdriver to depress first one latch, then the other. Don't use too much force - the latches are plastic and will break if treated roughly.

This is not something I would try as a consumer. Proper oiling requires disassembly. Take it to a reputable repair shop.

Does the bowl table rotate freely by hand? If not, it may need a squirt of spray lubricant. If the table rotates freely by hand but doesn't turn when mixing, look at the bottom of your beaters. The beater that is closer to the outside should have a nylon button at the bottom. This nylon button rotates the bowl as it turns. If the button is worn or missing, you will need to get new beaters.

Do you mean the beaters? Take a look near the top of the beater shaft. Does it have a slot which holds a wire ring? If the wire ring is missing, that would explain why it won't stay in. Try shopping for a new set of beaters if that's the problem.

I google Sunbeam Vista and found this website www.davesrepair.com/DIYhelp/DIYMixmaster-Model-Number-Locations.htm

My recommendation is to look for a dealer or repair shop that can sell you a new stand. If that doesn't work, try Ebay.

This is not something I would attempt as a consumer. To properly oil this model requires disassembly. Take it to a reputable repair shop.

My first suggestion is to search for a dealer and/or repair shop. If that doesn't work, try Ebay.

You might contact your chamber of commerce to find a dealer of Sunbeam parts. If you can't find a dealer, you might try Ebay.

Sorry we do not sell parts.

if the cord is part of the "blankey", throw the blankey away as it is a fire hazard

Check out the manuals at http://kitchen.manualsonline.com/manuals/mfg/sunbeam/sunbeam_mixer_product_list.html. Hope that helps

Check out this link for the manuals. Hope your model is there... http://kitchen.manualsonline.com/manuals/mfg/sunbeam/sunbeam_mixer_product_list.html