20 Most Recent Sunbeam 200 Watts 2372 MixMaster Series Hand/Stand Mixer - Page 9 Questions & Answers

Still have it? If yes, please e-mail me at [email protected]

the best online store for buying the parts of Sunbeam 2366 mixer:----the link is given below:--

http://buyitnow64.stores.yahoo.net/susthamibedo.html
all parts available in stock with them.
This will help. Thanks, please keep updated. please do rate the solution positively .thank you for using fixya

Hello. I have had good fortune from the following parts provider. That being said, I have also run into instances where no regular supplier had any old parts left. Then I put a free ad on craigslist by going to craigslist.org and clicking on "post to classifieds". I also look on craigslist for appliances already listed as for sale by doing a search there. Regards, Joe
www.householdappliance.com/sunbeam.htm
PS please rate my answer. Thank you.

I also have an A24 Mixmaster. The part you threw away was a wire wound resister. My problem is that the 0.05 MFD 190-250 VAC capacitor has gone short circuit. I am trying to locate a replacement, either new or secondhand.

Took it to a shop.

Hi Jill. Your mixer's gears are made of plastic and can't really handle heavy loads such as cookie and bread doughs. Contact Sunbeam Corp. to locate a parts place near you. You'll need to replace at least the large gear that turns the turntable base, possibly the worm gear that turns the large gear too. Grease these gears when you re-install the parts. You'll have to cut a couple of cable ties to get the machine apart enough to do the work. If this solution has assisted you, please rate it. Good luck! ricardok45.

Genuine Sunbeam PartsSunbeam Parts & Accessories.
Part Orders over $50 Ship Free!
SmallAppliance.com

I'll just get a new one if I've got to pay for advise.

Thanks for nothing.

Question moved from Cars and Trucks. Stand Mixers don't normally have belts and I don't believe this one does as I can't find spare belts. They are operated by nylon cogs that run in grease. The most likely reason is the she shear pin has sheared. This is a small pin like a nail that goes through a cog or shaft and shears if too much load is put on the mixer beater or dough hook. It often happens if you make bread and have the speed too high. https://www.google.com/search?q=change+the+belt+in+a+Bodum+electric+mixer ..

You will need to get a qualified electronics technician to look at it. The issue could be anywhere on the circuit boards inside the mixer. Unless you know what you are doing don't try to repair it yourself as you could make the problem worse.

Spray some WD40 into the eject button. The wait 10 minutes and turn it upside down and spray WD40 down the side of the beaters Leave 10 minutes and try again/ If that doesn't work, you will need full disassembly ..

Please state whether user or maintainance manual.

Question edited for clarity. The drive train probably need cleaning and re-greasing, but there is also a gear that wears out. https://www.google.com/search?q=Kitchen+Aid+Mixer.+How+to+fix+a+grinding+sound+when+switch+is+on+Medium+speed ..