20 Most Recent Sunbeam SBM7500W Microwave Oven - Page 7 Questions & Answers

POOR IN A BOTTLE OF WHITE VINAGER AND TURN IT ON

You can download the manual from Sunbeam here.

I believe AP Wagner is the only source for Sunbeam replacement parts. Give them a call at 1-888-APWAGNER (1-888-279-2463)or find them on the web at http://www.apwagner.com/. You can also contact Sunbeam directly at Appliances - Kitchen and Irons (800) 458-8407.

In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

Hello.
It sounds like the pump is not functioning at all, if the unit is under warranty then I would suggest taking it back ti the manufacturer. To replace this unit while under warranty would not be worth the time or cost in parts and labor. Nothing can be done without having to dis-assemble the unit.
I hope this helps Regards GM

Hi,
You may save the instruction manual on this LINK. Select coffee maker on the category then you may view and save it to your PC.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Check the kettle at another socket to ensure the socket isn't the problem.
Replace the fuse in the plug.
If the power flex is removable from the kettle, check the terminals in the connector havn't become burned.
The chances are that the element may have burned out in the kettle and in this case it probably isn't worth repairing.

Hi,

Yes, it is wave guide cover and usually it transmit microwaves to the inner compartment. If it is borken from screws, you can replace it, if it is just pops out, you can put it back into three side slots and then, there will be a plastic screw, which can be inserted with hard pressing by your thumb/back of your screw driver.
hope it helps

I have a solution to the dough hook problem for the Rival FPRVSM0001. I purchased some from the Rival website and my husband make a modification and they work great!! Made bread last night... SO happy! :) You can reach me at [email protected] if you'd like to get a set from me.

The manual for the Sunbeam SlushMagic SL5200 can be downloaded from this webpage:

http://www.sunbeam.com.au/Pages/Browse/ProductDetail.aspx?pid=1464


Click on the icon for Manual (pdf) just below the picture of the machine.

You may be able to find a User Manual at the following website. You will need to locate your model number which is likely on the bottom of the mixer.

http://www.sunbeam.com/InstManualsResult.aspx?section=kitchen&cid=17

A source for beaters:

http://www.abtecparts.com/Sunbeam_mixer_beaters.htm

Remove the black plastic thing from the filter basket.Check if that is cracked or broken.If its broken replace it,other wise remove it and clean it internally also clean the head gasket.:---It is held in by a little retaining clip. To get it out without damaging. Remove the spout (use a screwdriver wrapped with masking tape so you don't damage the spout...then use the screwdriver to leverage off the spout). Once you have the double or single spout off...get in there with a screw driver and pop it out! See fig below:-- its purpose is to insulate the pouring espresso from the portafilter, keeping it hotter. -------------

Remove the retaining clip for the basket with the tine of a table fork - easy!
- Remove the spout - you can use a screwdriver to loosen the double spout.
- A techscrew driver bit will be useful,It just needs to be something hard and cylindrical you can hit with a hammer to knock the plastic liner out. A bolt with an appropriate diameter would work fine.
- Placed the group head upside down on the carpet (to avoid scratching it on a hard surface) and give the driver bit a tap with a hammer whilst holding it against the bottom of the plastic liner.. It pops out with the tiniest of taps (and undamaged )

This is how dirty it gets/.Remove this and clean it and also check if its damaged:--See fig below:--

-----------------

Try this cleaning and checking.This will help.Thanks.Keep updated.Helpmech.

Hello,

due to long duration usage, the fuse (if any) in the plug may have blown. Your Outlet might also be the cause of the problem.

Plug the Sunbeam to another outlet and check if it will power on. If it still does not power on, then it means a fuse in the Sunbeam may have blown.

Disassemble the Sunbeam and check for blown fuse.

Let me know the out after plugging it to another wall/outlet and checking the fuse.

Good luck.