20 Most Recent
Tefal 61621 Steam Cuisine 2-Cup Rice Cooker Questions & Answers
I have got a 3
have got a 3 tire steam cruise. Which I was given where can I get
instructions on how to use it please
How many ml of waters
Good afternoon, Lilywaters31:
If the vegetables, even carrots, are in small pieces, less water is needed, but carrots need more water than eggplant, and spinach needs very little water, even 50cc will suffice. One cup of rice will usually require 2 cups of water.
Chr
Lost my instructions.. How do I steam actual veggies?
Hi,
- The water level as long do not overflow is ok. Ensure water do touches the centre of the element.It's important to ensure there is sufficent water in the base of the steamer by visually viewing the transparent water level gauage.You can top up water on the either side handle.Turn the timer on if you think that the food will cook at 20 min or so.A receipes will help and tell you to set the exact min for cooking.
Regards
Alan
Tefal actifry express error 1.
The fan is not working.
Check that all removable parts are fitted and correctly positioned ( bowl ventilation output grid and removable filter, pan, lid)
Check that there are no foreign bodies is all of these removable parts.
Tefal GV9360 causing mains failure
I guess what you mean is your steam generator is tripping one of the breakers in your consumer unit.
If it is the RCD it means current is leaking to ground.
If it is an MCB it means there is a short circuit or overload.
Both conditions mean the unit needs some serious looking at and with a portable appliance it is worth checking the power cord and plug for damage or loose wiring, however steam generators of various types and steam irons that these days the manufacturers claim can be used with tap water (straight from the faucet) can still suffer from limescale problems in hard water areas. Water dumps it's mineral content at 140 degrees F.
Scale build up on the heating element will tend to break away due to the expansion as it heats but stubborn bits will remain tending to cause hotspots and uneven heating and uneven expansion hastening element failure.
That might be your problem and a multimeter won't always find it. Sometimes there is visible evidence and sometimes it needs a test with a Megger.
Of course it might be something else...
Not finding what you are looking for?
