20 Most Recent VillaWare 5787 Double Smoothee Work Top Blender - Page 8 Questions & Answers

Hello, Colleen - I have no idea what "the plastic part" means for your Everstar blender. I don't even know the model number for your Everstar blender. I have searched online to find a source or sources for Everstar blender replacement parts, but so far have not found any. It seems the Everstar brand name for blenders was owned by Homer TLC, which also owns the trademark for Home Depot. I do not find that Everstar blenders are still manufactured for sale. You may wish to check on the website of one or more online resellers: eBay, LetGo, etc. to find the same model of blender as yours for sale, so that you can cannibalize it for parts. Best wishes.

I know this is an old, old post, but I could not find a solution anywhere, so hopefully this will help someone. We have a model 51BL25, similar to scottman55's blender, and it had the same problem. There are two separate nuts in the blade assembly. One holds the blade on, and the other holds the seal tight. When the latter gets loose, the blender shakes and leaks.
To fix it, first you have to remove the top nut holding the blade on. I had to get in there with pliers, but a ratchet with an extension would be perfect. This nut is right-handed ("normal"). Once that nut is loose, you can remove the nut and the blade. You will also want to remove the washer immediately under the blade (take note of which side goes up).
Now, you can pull the whole axle out by the wheel on bottom of the blender. This exposes a really thin, flat nut. In my case, this nut had come completely off, so nothing was really holding the seal together at all. Again, make sure you remember which direction the nut goes -- it is not quite symmetrical. That nut is what comes loose when the blender starts leaking. By the way, it is a left-handed nut, so it screws on counter-clockwise ("backwards"). Screw it in tight, then put the rest of the blade assembly back together, and your done. If you have the right tools, it should take only maybe 5 minutes.
Depending on your problem/model, this may or may not solve your problem. Hope it helps!

Search for: Make Model parts or contact the manufacturer

Put it in the dishwasher is best.

Possible manual, unsure which model it is. Use Comment menu to advise us, please. https://www.philips.co.za/c-p/HR2800_50/smoothie-maker/support https://www.philips.co.za/c-p/HR2800_50/smoothie-maker/support https://www.download.p4c.philips.com/files/h/hr2800_50/hr2800_50_dfu_eng.pdf

Hello, Patricia - Cooks is a brand name of JC Penney Co. So far, I have not found just lids for the Cooks single serving blender cups. If you have not already done so, I suggest you contact JC Penney Customer Service and ask: 800-322-1189 Best wishes.

Contact: http://www.russellhobbs.co.za

Hello - Apparently the Smoothie Plus 600 blender was made with the Back to Basics brand name. Apparently, Back to Basics products were manufactured by the West Bend Co. This is the link to the West Bend Co. Contact Us information: https://www.westbend.com/support/contact-us.html On that web page you will find the toll free phone number for Back to Basics products. Call the Back to Basics number during weekday office hours and ask about the availability of a blade part for your Smoothie Plus 600. Best wishes.

Contact this vendor in South Africa to see if they know how to obtain a copy of the user manual. https://www.game.co.za/game-za/en/All-Game-Categories/Appliances/Kitchen-Appliances/Mixers%2C-Blenders-%26-Juicers/2-IN-1-BLENDER-GRINDER-RSH-245611-018/p/00718957 https://www.game.co.za/game-za/en/All-Game-Categories/Appliances/Kitchen-Appliances/Mixers%2C-Blenders-%26-Juicers/2-IN-1-BLENDER-GRINDER-RSH-245611-018/p/00718957

depends some are straight out , some are bent down , some are bent up some have a combination of all three positions

Electrician

YouTube should have a video of it

I searched but could not found an instruction book on the internet. Two web sites might help provide some information, as there appear to be a number of similar models. https://www.amazon.co.uk/ask/questions/asin/B00XYJDDCQ/1/ref=ask_ql_psf_ql_hza?isAnswered=true If registered with Amazon, it is possible to ask questions, and perhaps someone could answer about an instruction book if you ask. https://www.clifford-james.co.uk/buy.cfm/kitchen-gadgets/cooks-professional-nutriblend-700w-blender/68/yes/115791 Amazon co uk Customer Questions Answers

https://www.manualslib.com/products/Russell-Hobbs-Glow-Smoothie-Maker-3587003.html Instructions for similar model. Russell Hobbs Glow Smoothie Maker Manuals

yes but you will have to do a search --fixya doesnt sell products

A pitcher carries fluids like ice tea.

try finding it here>> Procellular Services News Reviews and Deals Online

With the make and model# try SEARS PARTS DIRECT.COM. I think you will find what you need. Good Luck Friend.

Is it a new blender or one that has worked before? Sounds like something is restricting the blades or not quite assembling correctly. What kind of blender? Any chance you could post a picture so we can have a look at how it assembles?

Did you check to see if the original fuse was a slow blow version.

If you replace it with a normal or fast blow the start current could pop it

Other problem could be a developing problem on the heaters which as causing the current draw to rise

For that your need a megger to check for resistance through the machine or a PAT test should show it up