Top 20
Archos 5 MP3 Player - Page 7 Questions & Answers
Error 11 on my philips, how to fix it
If you see error code 11, your espresso machine needs to adjust from transport/outdoor temperature to room temperature. This can happen mostly during winter time when it is cold. To solve this, switch OFF the machine for 30 minutes and then try again.
I have several Pearlcorder J300 that I would like to be fixed. Where can this be done?
Finding the fuses in your Samsung PS WX 30 speakers may require opening the speaker enclosure. However, it's essential to note that opening electronic devices can void warranties and should be done carefully. Fuses are typically located on the circuit board inside the speaker.
If you are not familiar with electronics or unsure about the process, it's recommended to contact Samsung customer support or consult a qualified technician for assistance. They can guide you on proper procedures and offer advice on any issues you might be experiencing with your home theater system.
My clock makes it to 7:30, won't go past then
If your clock stops at 7:30 and won't advance beyond that point, there are a few potential causes for this issue. Here are some troubleshooting steps you can take:
- Check for Obstructions:
- Inspect the clock hands and the area around them for any obstructions. Sometimes, a small piece of debris or interference can prevent the clock from moving.
- Ensure Proper Power Supply:
- If your clock is powered by batteries, make sure they are fresh and properly installed. If it's an electric clock, check that it is plugged into a working outlet.
- Check the Movement:
- The clock movement (the internal mechanism that drives the hands) might be malfunctioning. If you're comfortable, you can open the back of the clock and observe the movement. Look for any visible damage or issues.
- Inspect the Hands:
- Examine the hour and minute hands. Sometimes, the hands can get bent or caught on each other, preventing proper movement.
- Reset the Time:
- Try manually setting the clock to a different time. If it moves freely until 7:30 and then stops, there may be a specific issue related to that time setting.
- Check for Mechanical Issues:
- If the clock has a pendulum, ensure that it is swinging freely and not getting stuck. For clocks with gears and cogs, make sure they are not damaged or obstructed.
- Consult the Manufacturer or Manual:
- Refer to the clock's user manual for troubleshooting tips specific to your model. If you don't have the manual, you can often find it online on the manufacturer's website.
- Professional Repair:
- If the issue persists and you're unable to identify the problem, consider contacting a professional clock repair service. They have the expertise to diagnose and fix mechanical issues.
Remember to exercise caution when working with the internal components of a clock, especially if it involves opening the back or disassembling parts. If you're unsure or uncomfortable doing so, seeking the assistance of a professional is recommended.
How to turn off power saving mode on my sony-mhc-gzr888d
you can turn off the power saving mode by following these steps:
- Press FUNCTION repeatedly until "USB" appears in the display.
- Press OPTIONS.
- Press / > repeatedly until "PWR SAVE" appears, then press ENTER.
- Press / > repeatedly to select "OFF", then press ENTER.
The power saving mode is now turned off and the system will not enter standby mode automatically.
Not finding what you are looking for?