20 Most Recent HTC G1 Smartphone - Page 8 Questions & Answers

please check it could be display or software issue. If it is software issue you can update the software.

THIS WILL MAKE YOU LOOSE ALL FILES!!!
(even password)
Take the memorycard out of the phone and,
put it in a computer.Use filesystem FAT-32
to reformat your memorycard.
Now the card will work again!
No password, No files will be left after a
complete reformat
This is your solution! Please vote!

THIS WILL MAKE YOU LOOSE ALL FILES!!!
(even password)
Take the memorycard out of the phone and,
put it in a computer.Use filesystem FAT-32
to reformat your memorycard.
Now the card will work again!
No password, No files will be left after a
complete reformat
This is your solution! Please vote!

Hello,

there is nothing wrong with your screen, the problem is from the flex that connects your screen to the phone's main board. This flex must have worn out that's why your screen is not displaying.

The problem is common with flip and slide phones. The flex gets worn out as a result of constant opening and close of the flip or slide phone.

I would urge you to replace the flex and I am assuring you that your screen will display again. You might also be lucky to find out that the flex is not well fix, that is, it may have loosed contact.

If you cannot change the flex yourself, maybe you should take the phone to a local repairer within your vicinity, so that the flex can be fixed/replaced.

Good luck.

i need to unlock my g1 and gmail wont let me do it

IF AT ALL POSSABLE TRY TO RESET THE PHONE

try xdadevelopers.com.plent info there

i recently bought a used g1 from a friend and tried to insert an sd card but it said the same thing sd card removed the card is fine then i did some researching and found out that the q1 has a sensor in the sd card cover which if it is opened it will say that message now my problem is that the cover is broken so i am currently working on a solution to that but if it is not broken then just try taking the sd card out turn off the phone and insert the sd card and properly close the cover make sure it is not opened even the slightest then turn your phone bak on and it should work unless the actual sd card reader is damaged or the sd card itself. hope this information was helpfull

go find for the beam settongs and check the box.to allow all incoming ang out going beams.

you need to pair the devices in order to connect and use the bluetooth. Its for security reasons.
once the pairing is done you can use it
to pair go to bluetooth menu then options or configuration >devices>add new

now search everything will be fine

if u dont have internet then use one of ur friends that does and then make and account shut it off put your sim then turn it back on and ur all set

It should be picture size issue. -Take a Picture -Open the picture in the picture browser
-Crop the picture (Can select the entire picture if so desired)
-Save
-Send the newly cropped picture in an MMS . Downsizing the image to 50-60kb. . should work.

hello,

the information that you are getting from your phone simply mean that there is an in built memory card in your phone


please note if you feel like adding more memory to your phone in other to be able to store more information for then you need to get a smaller mega bite

or you should reformat your phone from corrupting the new memory card

please if you are very sure that there is no memory card in your phone then you have to proper reformatting

Dood luck and thank for using fixya.

you can take the battery and the back off the device and place in completely submerged in a bag of white rice and leave it in there for 1 to 2 days this will help absorb the moisture, this should fix it if the water did not damage the circut boards if the water damaged the circut boards then the device is fried

The battery needs to be revived when it is completely drained or when it is dead because the phone will not be able to charge it. For instructions on how to revive battery, check it here.

Jtag is required at this point in time.. but a cheaper method for individuals is on XDA:

http://forum.xda-developers.com/showpost.php?p=5934885&postcount=6
http://forum.xda-developers.com/showpost.php?p=5911627&postcount=302

For additional details see the related threads.

PUKs, or personal unblocking keys, are used to unblock a mobile phone which becomes blocked. Mobile phones may become blocked when a PIN (personal identification number) is entered incorrectly on three consecutive occasions. In some instances, the phone may become blocked, which requires a PUK to unblock it, and in other instances, the SIM (Subscriber Identity Module) card itself becomes blocked and again will require a PUK to unblock it.Mobile phones are also blocked when they are reported stolen and if there is an outstanding payment on the account.It is important to differentiate between unblocking phones (using a PUK) and unlocking mobile phones (using another type of code). NOTE: It is a criminal offence for anyone to attempt to unblock a mobile phone, other than the network provider who put the block on the phone.If your phone has become blocked by mistake, for example you have entered the PIN incorrectly on three consecutive occasions, then you need to contact the mobile phone network operator with your details. To explain a little more, specific to your mobile phone network, You need to go to your Service providers, web site & navigate your way to the specific PUK details for your mobile phone network operator. Usually you have to Register your phone to get a PUK code.