Lionel Cw 80 Transformer "wire model train transformers" Questions

...train set- model 899v hobby transformer? There are 2 wires from the transformer to the power rail screws on the track. Hook up the wires and watch the direction the engine moves when you move the ...

...No power to the transformer or to the track? If not to the track, make sure you have the correct wire connections made from the transformer to track. If no power to the transformer from the wall ...

...wire the transformer? there are four connections on the transformer, and only three connestions on the track. ther will be four wires but they will ahve all colours blue black negative red brown for ...

how often should tracks be cleaned. Engine slows down after running for a while Penn 565 slows down after running a while. Is track dirty or do I need a stronger transformer? It depends upon how much ...

my f3 santa fe only runs in reverse with my 1033 tranformer I think its the 1033 transformer How does it work? try reversing your wires from the transformer to the track.

...does Open up the transformer and make sure the terminal has not become disconnected from the power wire. Sometimes from use the terminal becomes unattached inside the

I need info on how to connect from transformer to track. Ilost paperwork and wires. Power wire to center rail and ground wire to either outside rail.

I have a Multicontrol 115 volt transformer (4 posts) Model 1033. What posts do I use and where do I attached the post wires to the track clip connection? I went to a train dealer.

...(there are no screws on the bottom of the transformer to dismantle) and what do I then do? 18 gauge wire and plug? New wire and plugs are available at chuckstrains.com , they can also tell you how to ...

lionel o guage polar express set transformer has a bell button but don,t work no sound IfIam correct, the basic Polar Express came with just a whistle. There is an optional coal tender that has a ...