ASK Proxima Proxima DP2000X Multimedia Projector "power supply" Questions

...Power Supply Failure The power supply on my ASK Proxima c170 has failed. I would like to replace it with a generic power supply so that I may cheaply repair my projector. How do I find the specific ...

power supply has 2 portion, 1st is called primary and 2nd is called secondary. Primary power area is connected to ac oulet directly and secondry power area is isolated and source of power to projector

...power supply and turned on, after that it automatically shuts down. Power button does not light red when it automatically shuts down and need to be unplugged for a minute or more before red power ...

...power supply dead I have several Infocus projectors (X1,X2, X3 models) that have blown the power supply. A couple projectors blew the power supply when my home had some furnace smoke issues. I found ...

...power supply section. In your projector it is  inside the unit. The fuse of projectors will blows only if there is any trouble in the power supply. Just try to replace the fuse in the power ...

...power supply or fuse on projector? Projector no power remove the top, front and rear panels (4 copper screws and 4 silver screws on bottom, 2 silver on back). there are 2 fuses for the power supply. ...

power supply failure bypass Felau posted on here that he was able to rig an external atx power supply to bypass a failed one in a proxima LP240 projector. Any ideas on how to do this and still be able

...power supply. In detail, the output capacitor of the power supply causes the problem. I guess, Toshiba or Lite ON didn't consider the aging effect of the output capacitor. You should replace the ...

...power supply. The capacitors inside tend to overheat and burn out. They can be tested with ohmmeter for 25-30 ohms if you can get power supply open. Most people change entire supply. You can test ...

...power supply. but first check the fuse on the power supply board near where the cord plugs in. replace as necessary. if the fuse is ok and you need a power supply board, try