Question about Yamaha V Star 1100 Custom Motorcycles
...the correct idle speed (900 RPM). If that's not the problem, then check for air leaks between the carburetors and the engine by spraying WD-40 around the intake manifolds with the engine running.
...carburetor. 3.Adjustment: With the engine running at idle, use a screwdriver to turn the air/fuel mixture screw. Turning it clockwise (in) usually leans out the mixture, while turning it ...
Question about Yamaha V Star 1100 Custom Motorcycles
...carburetor adjustment how do I adjust the carbs on my 2003 honda shadow spirit 750 It seems to lean on the rear cylinder and rich on the front@ Let's focus on adjusting the air/fuel mixture. This ...
...carburetor adjustment screws to the idle adjustment screws until you have an equal vacuum for the four carbs and your idle is smooth and running at the proper speed. 11 Turn off the engine and remove ...
Question about Motorcycles
...carburetor for optimum performance. I usually ride vehicle below 60km/hr. Why did you need to clean the carb? Routine servicing of the aircleaner would keep the carb clean for life. The pilot screw ...
Question about Suzuki Motorcycles
...
Question about Yamaha V Star 1100 Custom Motorcycles
...carburetor off the bike yet, however i removed the air filter and don't see any mixture adjustment screws . i had to select the incorrect year and model, but this is a 1979 1340 cc engine This is not ...
Question about Yamaha V Star 1100 Custom Motorcycles
my maxim x water cooled 1985 700 c.c. how do i adjust the idle If you look under the carburetor rack you will see an oversize screw hanging down. When you turn that screw it will raise or lower your ...
Question about Motorcycles
how to adjust the air flow on a carburetor of a Yamaha TTR 125 L adjusting carburetor on a Yamaha TTR 125 L Using the screw on the left hand side of carb ,warmthe engine up screw in clockwise and ...
31 questions posted
Usually answered in minutes!
48 Questions
44 Questions
31 Questions
26 Questions
15 Questions