...were installed out-of-time after everything was installed including the cam chain tensioner. Note: if a valve was hitting the piston while kickstarting, it will be bent and will have to be
...replace. cam chain? tensioner springs? cam chain guides? cam shaft? You have a self adjusting cam chain tensioner. It is sold as an assembly. Take out the complete unit and replace it with a new one. ...
remedy is to replace the cam chain (if it's stretched). If, however, you have a manualy adjusted cam chain tensioner (highly unlikely), you have to look up the tensioning value in your workshop manual
Cam chain Tensioners on an 88 Cam chain tensioner for an 88 C.I. Is there a recall concerning the mechanical/spring cam chain tensioner. Replacing it with a hydraulic cam chain tensioner, such as the ...
cam chain noise on a CBR1100 from 1998 Can this be ajust ? if so where is the bracket on the engine Cam chain normally must be replaced, but sometimes cam chain tensioner may have some space to put ...
...cam chain tensioner is an automatic device. When the chain wears past a certain point and the tensioner can no longer compensate for the slack, it must be replaced. Failure to replace a slack / worn ...
Question about Honda Motorcycles
...Replace the cam chain with a new one if the projection exceeds 9.0mm (0.35 in)." You need two chains and the part is obsolete. Here is some info from partzilla.com 214401-MF5-004 CHAIN, CAM $157.80 ...
204 questions posted
Usually answered in minutes!
652 Questions
453 Questions
469 Questions
316 Questions
292 Questions