2002 Yamaha Xv 250 Virago S "motorcycle choke cable replacement" Questions

choke cable, there were clues. Thanks! The problems with a plunger style choke happen when the rubber on the bottom becomes deformed and does not seal or the spring does not push the plunger down hard

...choke cable on a yamaha 250 virago 2007. It seems to be quite a project. Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, ...

...where to purchase? Best place to buy the cable is at a Honda Motorcycle dealership or Honda online (hondaline)....replacing a choke cable is an easy DIY project if you have limietd mechanic

...choke cable and manually operate the choke lever until you are able to replace the cable. Depending on the severity of the bend in the cable, you may also be able to straighten the cable housing out ...

...choke cable may be detached or far out of adjustment. With a helper see if you can watch the choke cable move the choke lever on the carbs when you move the choke lever to full choke. Cables do break ...

choke cable choke will not stay out Just hold it out for a minute. or replace the cable. twist the choke forward after pulling it out not hard just a little bit should stay in place.

...choke cable Most choke cables are non-adjustable. If you think about it this makes sense. The choke is only for assisting the bike before it's brought up to operating temperature. So there is no need ...

...choke cable on a yamaha fazer is it much of a job to change the choke cable on a yamaha fazer 1000 ? choke cables normaly last for ever, so it prob needs just a bit of oil. remove upper end of cable, ...

...choke cable and, basically, make sure it does not get kinked or pulled tight when the handlebars are turned from side to side. Then, remove any excess free play in the cable by turning the adjustment ...