1987 Yamaha FZR 1000 "paddock stand" Questions

Need a center stand for a 1989 yamaha FZR1000. Where can I buy one? Centre stand was not factory fitted, must do some modifications to the frame, rather use paddock stand

...paddock stand put it in second gear and rock bike back and forth to bed new clutch plates in. Is this correct Back wheels often move when the lever is pulled in...this is due to hydraulic drag caused ...

paddock stands to hold up the bike and is quite simple really just undo the nut think its a 27 or something no need to mess with the calipers when on the stand it will just slip off a bit of grease on

How can I remove rear wheel from Ducati monster 696? Raise the rear of the bike on a single sided paddock stand, undo the big nut on the wheel and slide the wheel off. 

how to remove the back tire of a suzuki sv 1000 tire shop, paddock stands, loosen the rear tensioners, pull the spindle, take wheel to mechy, buy tire from ebay, musty be cheaper. 5 gbp to change with

...paddock stand seems to be happening again after only about 60 miles. Any ideas wot can be causing this? Your carb are over flowing .a bad float needle could cause this .If it is fuel injection one of ...

...wont stop That could be the final drive bearing or wheel bearings or even a sticking brake. If you place it on a paddock stand, turn the rear wheel by hand and you will be able to determine the

dropped, the stand could easilly be slightly bent. Put the bike on a paddock stand and take a closer look. It will become obvious as soon as you can get underneath with the stand. Ride safe. Nice bike

...paddock stand and turned the rear wheel only to find that the chain goes loose and every time a certain part of the back sprocket comes round it all tightens, as it goes passed loosens again. started ...

no centre stand how do you get wheels off I use a paddock stand. It is so usefull for working on any bike. Keeps the bike upright and stable.