1979 Yamaha XS 500 "timming marks" Questions

no I need the timing aspects for yamaha xt500 1979 I need to know how to set the timming when you post about a 79 xs 500,then that is the answer you get,line up the timing marks at tdc

...timming marks up but iam not sure of wicth timming mark it needs to be on witch timing marks the one on the cams or the flywheel if you lined all the cam marks up with the pinion gear your good to go ...

how to set timming on a 200 shaft atv i put a new timming chain on my 200 honda and dont know how to set the timming Does it have electric start? This makes it a little more difficult to see the T ...

timming.i belive it's jumped.none of the marks line up.when i put number 1 @ top dead after in.valve comes up i belive the cam lobes should be faceing each other and no.1 on in. ex.cams should line up

timing needed some help in setting the cam timing align the cam timming marks with the cylinder and the marks on the magnito with the marks on the case

...timming marks on your cams are off. You got to go back inside your motor. Your ignition timming and your cams got to be timed the same.Are your cams turned the right way ? IS your timming chain set ...

...timming how do i put the camchaft in time on a 2006 crf 100 the timing marks are on the gears. You will see tiny little mark or arrow. One on each gear. They have to be pointing at each other to be ...

need to see timming marks on 96 cu.in. S&S Remove timing plug (left side, below where cylinder bases form a "V"), and rotate engine until timing marks become visible.

how to set cam timming xs1100 both cams to tdc mark (direction of cyclinder for tdc). krankshaft on tdc mark. as check piston should be highest point in cyl 1 and both valves closed. you would be ...

...timming is correct.!! Sincerely Joe marx You do not put on a belt unless the cam and the crank are in the correct positions. You have to be very careful not to turn the motor and bend a valve. There ...