...access the bolts from inside the guard. The front ones are mounted with screws underneath the chrome mounting. Once you remove the mounting the wiring can be easily unplugged and indicators
...access the main fuse lift the fuel tank lid and remove the six bolts that are holding the left and right tank covers in place (not the screws that are located under the fuel cap) then remove the two ...
...the lightthat is above the front turn signal and I can't find a way to tighten them Sorry I would have to see it. But maybe there is a fastener you can access from inside the assembly behind the
Question about Suzuki Boulevard C90T Motorcycles
...willl have to loosen the nuts that retain the tail light assembly to the fender, then access the turn signal from the front of that assembly. You'll need an open-end wrench to break the t/s nut
Question about Suzuki Boulevard C90T Motorcycles
...will be behind the right side panel, everything else will be behind the left side panel to access fuses pull back on the front two locking tabs and slide the cover up. Good luck and have nice
...front turn signals Remove the screw on the bottom of the chrome plastic cover under the headlight, then pop it loose from the rubber mounts. Now you have access to the jam nut and wiring of the ...
Question about Suzuki Boulevard C90T Motorcycles
under the plastic wing shaped chrome thing under the headlight. this wing thing can then be pulled to the front and u have access to the nuts and bolts that hold the indicators to the rest of the bike
Question about Suzuki Boulevard C90T Motorcycles
...front and rear stay on all the time. The left one works fine, but the right one stays on without blinking. The signals are factory with no after market lights anywhere. Probably a bad Turn Signal ...
144 questions posted
Usually answered in minutes!
7 Questions
5 Questions
5 Questions
4 Questions
1 Questions