valve settings for rmz 250 what are the settings for a 2004 rmz 250 because I have looked but cant find the settings on the internet Exhaust Power valve setting for stock is: 1/2 turn out from closed.
Question about Suzuki RM-Z 250 Motorcycles
I've got an 2010 rmz 250 runs fine when cold and I've got an 2010 rmz 250 runs fine when cold and idle is fine but when warm as soon as you give it abit it just splatters an coughs heaps any ideas
rmz would not start so checked spark has spark has gas and oil so looked on line and read it might be valve troulbe so i all so jump stated it no luck did not try to hard it was only riden a little so
suzuki rmz 250 2005 i have had my valves reshimmed 2 rides ago but now my bike wont strt nt sure whethere its the valves again or somin else i managed to bump strt it and it sounded weird do u now wht
rmz 250 valve problems my rmz 250 05 has had to be re shimed every time i ride it .its only on one valve on the intake side . i have a suzuki manual this says every 15hrs not every 2 hrs could this be
rmz 250 2004 hard to start but easy to bump how do i tell what the problem is heard it could be many things i just had the same problem on my 04 its the valves they need to be adjusted are u using the
08 suzuki rmz 250 backfires i have checked the valve clearence and they check out fine. what else do i need to run through to fix the problem? timing and fuel/air mix
Question about Suzuki RM-Z 250 Motorcycles
rmz 250 With the valve rocker covers off and magneto inspection plug and centre plug removed, turn motor using nut on magneto, counter-clockwise until a line appears centrally in the inspection window
Question about Suzuki RM-Z 250 Motorcycles
...rmz 250 2004 was under the last week i have to use more kick to start it every day and now it wont start at all. Some times i shoot flames from the exhaust. YOUR VALVE CLEARANCES NEED TO BE ADJUSTED ...
96 questions posted
Usually answered in minutes!
67 Questions
0 Questions
2 Questions
1 Questions