2006 rmz250 When I torgue the cam bearing 2006 rmz250 When I torgue the cam bearing journals on the exhaust cam the cam turns very hard. The intake cam tightens just fine. The previous owner said it ...
Question about Suzuki RM-Z 250 Motorcycles
My 04 rmz250 is overheating. It started smoking 3 different times when i took it out the other day. Id let it cool down for a few, continue riding and about 20 minutes later it would start smoking ...
is it a nise bike wud you take 200 pound 200 pound for a rmz250 tell them to take a run mate atleast £1300 minimum depending on condition
torque setting for sump plug on rmz250 8mm bolt-18ft/lbs 10mm bolt- 22ft/lbs Hope this helps regards Andrew Porrelli
location of oil drain plugs on a suzuki rmz250 2009 one bolt, look underneath the engine, could be in the middle or off to the side a bit. There is only one drain bolt, with a head size of about 14mm
what are the valve clearances on a 2009 rmz250 so here is the answer straight from the manual: Intake: 0.09 - 0.16 mm (0.004 - 0.006 in) Exhaust: 0.17 - 0.24 mm (0.006 - 0.009 in)
Question about Suzuki RM-Z 250 Motorcycles
Just baught a 2004 rmz250 and its burning oil any sugestions ? Hi,,first thing to check is the valve stem seals,,,then id be looking at piston rings and checking the condition of the bore. ...
Question about Suzuki RM-Z 250 Motorcycles
i have oil blowing out my breather tube on my 06 rmz250 but its not blowing smoke wot could it b your float is getting stuck open because I had the same problem.
2004 rmz250 choke if your having a problem starting it is usually always the valves that need to be set/ reshimmed mech.i also have 06 crf 250
rmz 250 engine My 04 rmz250 will shift into neutral and first gear, then it wont shift too second. Could this be a bent shift fork or bad clutch plates? Help please could be the shifting paw
96 questions posted
Usually answered in minutes!
67 Questions
0 Questions
2 Questions
1 Questions