2004 Suzuki RM 250 "ring gap" Questions

Ad

Question about Suzuki RM 250 Motorcycles

1 Answer

2003 RM 250 THE BIKE HAD 15-20 HOURS ON IT FROM NEW.I THEN DID A TOP END JUST RINGS.I BROKE THE NEW RINGS IN AND I PUT 8 HOUR MORE ON THE BIKE AND SHE LOCKED UP.AFTER A NEW CYLENDER AND PRO X PISTON ...

Ad

Question about Suzuki RM 250 Motorcycles

1 Answer

...gap with ring keeper pin...also, pay attention to orientation...some have an angle on the upper side of the ring. Install one of the circlips, rotate it so the gap does not line up with the hole, gap ...

Ad

...ring gap will denote if standard , worn or oversize to standard new rings in new bores will have a ring gap of around .010" worn rings will have a larger gap up to .040" and will have sharp edges ...

...ring gap on a 2001 Honda cr80 motorcycle I just need to know how much to gap it can you help? Thankyou ring gap is checked at the bottom of the cylinder and is normally .010" minimum to .025" max ...

Question about Suzuki RM 250 Motorcycles

2 Answers

...ring gap should be off set to each other and generally placed between 20-25 past and 25-20 to [like a clock] but no where near the side of piston at little end pin.also use a little oil in grooves to ...

Question about Suzuki RM 250 Motorcycles

1 Answer

...nrg keeps on braking pistion rings why when you put in your new rings make sure you check the ring end gap if the gap is not right it will not lube the rings properly thus ending up with broken ...

Question about Suzuki RM 250 Motorcycles

1 Answer

...gap in the ring. Anything more than 1/16" and you need rings the next size up. If the ring won't go into the cylinder because the gap fully closes, the rings need to be a smaller size. With the ...

...ring gap is what is important and it should be around .003" per ever 1" of bore so for a 3" bore the gap should be around .010" experience has proved that if the cylinder is bored to say .020" ...

Question about Suzuki RM 250 Motorcycles

1 Answer

oil in head, fouling plug bike is using way too much oil, it blows white smoke . thought it was oil ring so I had the dealer mike the barrel & it was good so I put new piston & rings 300 miles

Question about Suzuki RM 250 Motorcycles

1 Answer

...ring end gap so they do not bind when they get hot. The numbers/letters face up. The gaps should be placed around the piston so they do not line up.(120 degrees for the oil rings and 120 degrees for ...

Not finding what you are looking for?
2004 Suzuki RM 250 Logo

48 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...