...rear "P" position, the brake light only works, not the tail light. p park position should only light the tail light, so my guess is there is one filament of the stop tail bulb shorting to ...
Question about Suzuki VL 1500 Intruder LC Motorcycles
Rear tail light does not turn on.when you turn key on headlight works ,brake light works turn signals work but no running tail light,I also had a weak battery which I am replacing , the bike is a 1998
i need to know how to tell if my rear brakes need to be replaced on my 2001 suzuki 800 intruder if you can see the pads check if they look thicker then a dime, if they get down to that thin then ...
rear brake light does not work tail light does need to know were brake light switch is? Your bike is equipped with two brake light switch, either of which should cause the brake light to come on when ...
Question about Suzuki VL 1500 Intruder LC Motorcycles
...rear brake master cylinder. Something is wrong with this as your rear brake is not working. The brake light for the rear brake is activated by a pressure switch whereas your front brake light is ...
rear brake light will not work when brake pedal is applied, both front and rear brakes run through same sensor front brake applies rear light, but rear brake pedal doesnt. where is the problem? It ...
Rear brake light not workiing Rear brake light not working on 2000 HD Road King....New bulb and new brake relay fuse...Where is the brake switch located? There are two brake light switches. One is in ...
...rear brake light switch underneath the bike and the brake light itself. If the tail lights work, then you know what circuit is ok. Look at your rear brake master cylinder. Find the metal line coming ...
rear brake light not working The brake light is turned on and off by either of two switches on your bike. The front brake lever has a switch located in the right handlebar switch housing. When you ...
rear brake light pressure switch. Follow the metal tube that comes out of the rear brake master cylinder going back to the rear brake. You will find a pressure switch in the line. Disconnect the wires
121 questions posted
Usually answered in minutes!
131 Questions
113 Questions
40 Questions
22 Questions