2008 KTM 250 XC "idling" Questions

my 250 has no top end throttle coughs and sputtes at 3/4 to full throttle and wont idle worth a **** HELP ok buddy you can try this on carb is a scew the mixture screw try fidling with this till it ...

time for a top end or jetting? The bike doesnt start after its warm unless the choke is on. It doesnt idle very well at all. Air mixture screw is 1 and a half out. Idle is about the same 1 and a half ...

bike only starts with choke on and wont idle .by the way its a ktm 250 xc 2006.air filter is clean and has new plug . wondering about needle adjustments? If your bike ran good previously - and nothing

ktm250 2 stroke 2007 wont idle but sometimes does overruns going downhill when throttle off plug is black air screw 1.5 turns out clean your carbarator

it idles fast if I turn the idle down it stalls running rich on top end at fast idle sometimes it will drop to a very low idle and shut off adjust the idle mixture screws first and then adjust the ...

2010 Honda Fury how to adjust the idle speed it is on idle at 1100 rpm when at operating temp@ To adjust the idle speed on a 2010 Honda Fury, you'll typically need to locate the idle adjustment screw.

carb problems my idl is to high and i think my Air/fuel ratio is off Ok, lower the idle and adjust the carb to best idle and turn down the idle and readjust the carb to best idle. back and forth till ...

wont idle how to adjust carb Make sure your spark plug is not fouled and the gap is correct, also air filter is properly cleaned. If it still wont idle, locate the idle adjustment on the carb. There ...

...it. Aside from that, there are two other things that can cause your engine to die when it should be idling: the idle speed mixture adjustment, or low cylinder compression. Of course, if it was idling ...

trying to adjust the idle speed. running at 1500 instead of 1250 rpm The idle speed is controlled by the bikes computer, the ECU. The 1500RPM idle is normal. If you purchase a Race ECM from Erik Buell