2005 kawasaki KX 250 "replace" Questions

...make a note of kickstart stop location carefully remove the shaft holding the gears together replace the spring followed by the. Replacing the shaft and tensioning the spring before cover ...

...come with a set of keys because the previous owner lost them over the years, do I have to replace the ignition switch or can I jus order a replacement key? you can find manufacturing year

...know how to fix the problem if its fully adjusted and it is still too soft then it will need to be replaced. you may be able to just replace the coil spring only. check with local MX ...

Can a kx250 2002 two stroke barrel be rebored or should the sleeve be replaced . Replace the sleeve is the only option - I think there would not be enough cylinder wall left if you rebored it as it is

How do you replace the reeds on KX 250? Remove the carburator to gain access. Unbolt the reed block from the back (rear) of the cylinder. You can replce the reed block assembly, or if you just got the

...going to the head to the cooling chambers filled with anti freeze. This means you probably need to replace your head gasket on the motor. While you have the head off check to make sure that the head ...

I am considering replacing the entire crank assembly. any tips? I am considering replacing my crank assembly in my 1994 kx 250. I know that the connecting rod lower bearing exploded and caused the rod

...where the seals were, clean the piston with wet and dry paper or 1000 - 1200 grade glass paper and replace seals lubing up with brake fluid first do not use oil or grease as this will swell the

...has sat for a year. Only starts choked, so carbs probably need cleaning. Can I clean without kit replacements (bike only has 4500 mi. on it), and do I need a vacuum meter to set synch.? Hi there ...

...fine and runs sweet as ever engine has had lots spent on it so i no its just first gear i need to replace can someone tell me what this should cost in a shop and how long this would take a pro to