2003 kawasaki KX 125 "jetting" Questions

spark plug keeps blowing on my kx 100 if your fouling plugs then either your fuel/mix ratio is off ( should be mixing 32:1 ) (or) your bike is running to rich( getting to much fuel to engine) which ...

What is the right Jet sitting for a Mikuni KX 125 Carburator 1987 Model? It should have a #370A main jet in it. The pilot jet should be a #35. The jet needle should be a #R-2. The throttle screw ...

just wondering what could be causing flooding with my kx 125 Causes of flooding on your bike are: Float level set too high Too large a main jet, #420 std. ( 400 min, 470 max) restricted air flow / ...

kx 85 04,bike had a slight bog when throttle was gassed then i cleaned the carb,now it really bogs and running very rich.i also messed with the air & idle screws hoping i could fix the problem ...

I have a 2003 kx 125 and I cant seem to get the jetting right. I keep fouling plugs. My current carb settings are # 35 pilot jet, # 410 main , 2nd clip position from the top of my jett needle and air ...

how do i chang the jetting on my kx125. i got the jetting changed on my bike win i first got it. now i want to chang them agento sompthing fatter/slower Remove carburator bowl. Main jet is the brass ...

i have a kx 125 it idles fine but when i am driving it it wont rev out Sounds like there could be a problem with the main jet not delivering sufficient fuel for normal running. Clean out the carb and ...

ive got a 96 kx 80 that starts first kick,but battlels on pull off until powerband then takes off wildly.ive changed head gasket plug,set float and cleaned jets.my altitude is 2100 m/s,air screw is ...

...know a lot about Kawasaki motorcycles nor the carbs they put on them. But, I do know a bit about jetting carbs. The first thing that strikes me is the 152 main jet when a 160 is stock. This ...