clutch lever,adjust lever until you have about 1/8" freeplay.if still not disengaging, you need to drain gearbox oil, take clutch cover off & inspect clutch pack, you may have friction plates sticking
clutch lever (should be ~1/2 to 3/4 inch)? Wrong number of clutch disks? Are the clutch springs installed correctly and not bottomed out. Inspect the hub and the inside of the outer drum of the clutch
...clutch lever off my kx 250 put a new clutch lever on now clutch cable has 2 much play and wont engage tried adjusting to no avail Be sure you were given the correct cable, The stock cable is part ...
able to adjust the clutch to were it needs to be. question is the lever that the cable attaches to lose as in can you move it front to back? can you reposition the lower clutch lever/arm to take it up
Question about kawasaki KX 125 Motorcycles
...in gear while holding the clutch. i can't sit with it in gear while holding the clutch. try adjust the clutch at the lever if that doesnt work the problem might be that your clutch plates have ...
Question about kawasaki KX 125 Motorcycles
...clutch cable if it is binding at all replace it. If the lever on the motor does not go all the way back to riding position (disengaged clutch position). You may have to disassemble the motor to check ...
...clutch lever, the bike jumps forward............. in other words, the clutch doens't release slowly and smoothly. I have opened the clutch, all clutch plates are in very good condition. I have tried ...
Question about kawasaki KX 125 Motorcycles
...that be the fluid dont think its a fluid issue. more like a clutch adjustment either at lever or in mid section of cable if that doesnt fix you might have to replace either clutch cable or clutch ...
Question about kawasaki KX 125 Motorcycles
...clutch starts to open (the lever moves on the motor) Wat lube are you running in the case? some goopey slop will cause a significant drag. When the clutch is in you are still turning all the gears in ...
Question about kawasaki KX 125 Motorcycles
...6 o'clock position. 3 Place the engine kill switch on the right handlebar into the "RUN" position. 4 Pull in the clutch lever and depress the starter button on the right handlebar to start the
326 questions posted
Usually answered in minutes!
29 Questions
21 Questions
7 Questions
6 Questions