1998 kawasaki ZX-6R Ninja "cover stator" Questions

Ad

Question about kawasaki ZX-6R Ninja Motorcycles

1 Answer

...stator cover bike wont start i have a 98 zx6r which i had a cracked stator cover when i swapped the stator cover now the bike wont start with the button only with bump start. dont know if battery is ...

Ad

Question about kawasaki ZX-6R Ninja Motorcycles

1 Answer

...stator cover and bent the flywheel will the batt not charge if the stator and flywheel is rubbing the stator Correct, the bike will not charge. Aside from that, if the flywheel is actually bent, and ...

Ad

Question about kawasaki ZX-6R Ninja Motorcycles

1 Answer

...stator cover on my 95 zx6e and discovered the wires had been cut. so now I have 3 black wires from the stator and 3 yellow wires from the harness. anyone know what I need to do to get it wired back ...

Question about kawasaki ZX-6R Ninja Motorcycles

1 Answer

...stator is let alone how to replace it with the new one It should be bolted to the bolted to the inside of the left crankshaft/engine cover. I found this 2005 manual, but it should still be the same ...

Question about kawasaki ZX-6R Ninja Motorcycles

1 Answer

...stator/ rotor cover seal is bad, water may have got on the stator and corroded. If it filled with water then its shorted out. Start at the battery with a test light and work your way through your ...

Question about kawasaki ZX-6R Ninja Motorcycles

1 Answer

...cover on the left side of the crank, it runs in oil. if you have changed the regulator and the battery is good,it is very likely the stator of the alternator. You would really need a manual to check ...

...Stator Cover: Once the engine covers are off, locate the stator cover. It will be secured by bolts around its perimeter. Carefully remove these bolts and gently pry the cover off. Be cautious not to ...

Question about kawasaki ZX-6R Ninja Motorcycles

1 Answer

the stator remove the left crank case cover and unbolt the stator from the inside of the cover. Do not forget to purchase a new left cover gasket with the new stator or you will just delay your riding

Question about kawasaki ZX-6R Ninja Motorcycles

1 Answer

...to fit a new stator to my CBR 600 FS1. How do i do this ? The stator is bolted to the left side cover. Remove the cover and you have removed the stator. Then just unbolt the stator from the

Question about kawasaki ZX-6R Ninja Motorcycles

1 Answer

...stator cover. Check that none of these wires has conunuity(connection) to earth. If any/all do you have a burnt out stator- remove the stator cover & inspect- the windings will look burnt & ...

Not finding what you are looking for?
1998 kawasaki ZX-6R Ninja Logo

84 questions posted

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...