Question about kawasaki VN 1500 Vulcan Classic Motorcycles
10 min. run power loss. Gear down, trottle up helps some. Lots of backfire. Oil light says ok. Put in ''Sea Foam'' helped some but hasn't stopped. You need to have the valves adjusted. If they are not
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...adjust the amount of fuel injected. The overall result is excellent engine response and power with increased fuel efficiency. The ECU also has a special pin that allows technicians to check the ...
Question about Harley Davidson Motorcycles
...Adjust on the looser end of the range: Set the adjusting screw to finger tight so that you cannot turn the push rod between forefinger ... Valve Adjustments - Harley Davidson Forums Aug 21, 2007 99 ...
titan motercycle valvs adjustment need the valve adjustment spects This is a general answer and not specific to your machine. Around 10 thousandths depending on if it back fires.
Question about kawasaki VN 1500 Vulcan Classic Motorcycles
...adjust for 03 honda shadow vt1100c If the same as 1985-1998 VT 1100 - you have a hydraulic valves, so NO adjusting, if Noise - valve tappets clogged, take out engine oil, use cleaning oil, start ...
Question about Ultra Motorcycles
...10 plus minutes'? Set too long and you risk hitting the valves, too short and the valves won't open properly. Depending on which one it was you might need to take the cylinder heads off to check the ...
304 questions posted
Usually answered in minutes!
86 Questions
60 Questions
52 Questions
44 Questions
41 Questions