1996 kawasaki ZX-6R Ninja "engine igniter" Questions

WHAT IS THE FIRING ORDER FOR KAWASAKI ZX600R The ZX6, as with most four-cylinder motorcycle engines, is mounted transversely in the frame. When sitting on the bike, the cylinders are numbered 1-2-3-4 ...

...to the battery terminals Be careful jumping of a bigger battery it can spike the regulator when the engine starts and tries to produce 50-60 ...

...the entire electrical circuitry is ready for functionality observations with separate entities. Engine Technicians Tactic PHASE 2 A bike engine inspection includes observation for indications of ...

...spark plugs are correct > NGK CR9E or use NGK C9E. Too hot a plug, ( i.e. cr7e ), will make the engine run at a higher temp. Please rate my answer.

...side show 12 volts red and green side have no voltage?? What do you think. thanks Keith Spin the engine and recheck, the coils should receive voltage ...

Once the engine warms up. and i stop, it won't restart! I have a zx 6r j1. Once the engine warms up. and then i stop for whatever reason, petrol, shops etc, i can't restart the engine. The ignition ...

engine turn over. no spark My ninja 250 had sat for a year or more. It turns over but no spark. I replaced coils and cleaned to carbs but still no ignition. please help. use a ohm meter see that the ...

...in on position for safety reasons, eg if you had to pull over and it was dark you would turn the engine off but would still need

...sludge, dirt, water, rust, etc. 4. Fuel supply valve/petcock turned off. 5. Fouled spark plugs. 6. Engine flooded as a result of overuse of the choke. 7. Vacuum hose to the fuel supply valve/petcock ...

...what it could be. Hi and welcome to FixYa, To my understanding, the problem is 'no spark' yet the engine cranks. Generally, to consider are: pulser coil (least likely); ignition coil (likely); ...