1990 kawasaki ZZR 600 "water pump seal" Questions

Ad

Question about kawasaki ZZR 600 Motorcycles

3 Answers

...pump i believe, you should not see oil in the water also your bike will run fine but when hot will foul the plug with water look for white smoke sometimes and the smell of anti freeze on start up i ...

Ad

Question about kawasaki ZZR 600 Motorcycles

2 Answers

...water pump, shouldn't leak. That is the weep hole for the water pump located along the water pump shaft passage between the oil seal and the water seal. The water seal is leaking coolant. You'll need ...

Ad

...water pump housing? A leak on the O-ring seals on or sealing the spinning shaft. It is a known issue because a Water Pump Service Kit is readily available. Motorcycle Water Pumps for Yamaha YZ250 for ...

Question about kawasaki ZZR 600 Motorcycles

1 Answer

...water pump? You probably have a bad water pump seal or a bad oil seal on the water pump shaft. Buy a new water pump and the K&L water pump gasket kit. The K&L gasket kit comes with all the ...

Question about kawasaki ZZR 600 Motorcycles

3 Answers

...water pump seal and oil seal have failed on the water pump shaft. Replace both seals noting which way the seals face. replace the water pump shaft if it is scored. Chaz- Moto DC Milky oil generally ...

Question about kawasaki ZZR 600 Motorcycles

1 Answer

...water pump housing. And yes it is coming out of the small hole behind the water pump. Could this be the oil seal on the water pump? Steve yes steve- this is the water pump by-pass hole. There is a ...

Question about Husaberg Motorcycles

1 Answer

water pump seals water in oil and water coming out of pilot hole taken out outer seal but the back one dose not look that good and to replace do i have to remove the head please help thanks Basically ...

Question about kawasaki ZZR 600 Motorcycles

1 Answer

water pump gasket leaking. Can I replace the gasket only? There is a round o-ring that seals the water pump to the motor (oil seal). Then there is a shaped cover o-ring that seals anti-freeze into the

Question about kawasaki ZZR 600 Motorcycles

2 Answers

...water pump It is very likely the water pump seal. It is always a good idea to replace the bearing while you have it opened up. Hi there. Your problem is a common thing on all watercooled motorcycles. ...

Question about kawasaki ZZR 600 Motorcycles

1 Answer

...water pump Most Yamaha water pumps have a "weep hole" on the bottom of the water pump housiing. Basically your water pump shaft has a coolant seal and an oil seal where it is driven...the weep hole ...

Not finding what you are looking for?
1990 kawasaki ZZR 600 Logo

40 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...