2004 Honda STX 1300 Pan European "changing brake light" Questions

...brake pads. After about a week later I noticed the pads were giving off a king off rubbing sound during braking. Need you advice what could be the possible fault souns possible that the pads have ...

...brake light stays on You need to identify which brake light switch is sticking,  simply unplug one switch at a time to determine the problem.  It is possible that a brake light wire is ...

brake light filiment goes on when brake is applied.The extra filiment makes the tail light go brighter.If both filiments are on when lights go on then applying the brake won't change the intensity.You

...brake light stays on I changed the rear brake swith and the light is still on The brake light also is activated by the front brake switch. Check adjustment on rear brake switch to see if you can get ...

...brake light is not working but the tail light works. changed bulb there is power going to the brake light switch an u can hear the relay clicking when you hit the brakes. but if you put a test light ...

Brake light doesn't come on When appling brakes light doesn't work.Checked the bulb and fuses.Changed switch. Check if theres live current with a tester on the brake light switch. Is this problem ...

...Did you check all of you fuses. Is it just the rear brake light or both for front and rear??? Are the running lights working??? Going to need more information than you have provided I am

everything is fine then suddenly starts locking up again , brake failure light stays on Service the brake calipers and change the brake fluid. Bleed through the calipers then through the ABS modulator

...brake light not working on a derby Mulhacen 125 ?/ nothing both brakes have their own brake light switch ,the rear one will be near the lever and have two wires going to it.debi is Spanish and they ...

...brake light switch for the rear brakes. It may not need changing out, these are usually adjustable. As you screw them out, they make the brake light come on sooner, as you screw them in the take ...