2004 Honda STX 1300 Pan European "change brake light" Questions

...brake pads. After about a week later I noticed the pads were giving off a king off rubbing sound during braking. Need you advice what could be the possible fault souns possible that the pads have ...

...brake no change in light, pull frt brake no change brake light stays on You need to identify which brake light switch is sticking,  simply unplug one switch at a time to determine the ...

...when lights go on then applying the brake won't change the intensity.You might have bad brake light switch causeing brake light to stay on.Have to do some checking to see if it's front or rear

...change them Front brake light switch is located next to the hand lever for the brake. Look underneath and you should see two wires attached to a little black box. This is the mirco switch.Rear brake ...

...brake light stays on I changed the rear brake swith and the light is still on The brake light also is activated by the front brake switch. Check adjustment on rear brake switch to see if you can get ...

...brake light is not working but the tail light works. changed bulb there is power going to the brake light switch an u can hear the relay clicking when you hit the brakes. but if you put a test light ...

...going to it.debi is Spanish and they sometimes use hydraulic switches so this is a little trickier to change then a normal mechanical switch, you may need to bleed the brake after you have changed

Brake light doesn't come on When appling brakes light doesn't work.Checked the bulb and fuses.Changed switch. Check if theres live current with a tester on the brake light switch. Is this problem ...

everything is fine then suddenly starts locking up again , brake failure light stays on Service the brake calipers and change the brake fluid. Bleed through the calipers then through the ABS modulator

...change brake control switch what could be causing this Tamesha, you may have to adjust brake switch button, so when the brake pedals arm is in the up position it is pushing button enough to break the ...