2002 Honda CBR 600 F(4)i "tighten loose chain bikes" Questions

Ad

Question about Honda CBR 600 F(4)i Motorcycles

1 Answer

...chain goes loose and tight on back wheel turn when riding i get a grinding noise coming from the front sprocket. i adjusted the chain. when came back from a ride the noise was still the same. so put ...

Ad

Question about Honda CBR 600 F(4)i Motorcycles

2 Answers

...tighten a loose chain loose chain To tighten a loose chain you need to pull the cotter key pin from the rear axle then loosen but do not remove the nut. It just has to be loose enough to slide in the ...

Ad

Question about Honda CBR 600 F(4)i Motorcycles

1 Answer

...loose and i was wondering how to tighten it Loosen the Back Nuts on the Side of the Rear Wheel, Then use a Wrench to Turn the Bolts extending out the Rear of the Bike in Clockwise to pull the Rear ...

Question about Honda CBR 600 F(4)i Motorcycles

1 Answer

...has become loose but don't know how to adjust it. How do you tighten the chain ? Generally there is a screw or screws on the back or somewhere to tighten the chain within a certain inch wise

Question about Honda CBR 600 F(4)i Motorcycles

1 Answer

...loose to out of spec tight. My first guess is my chain is old and needs replacement, but how likely is it that something else is causing the chain to tighten as it rotates? I don't think I could have ...

...loose. I am wondering how much do i tighten it because i dont want to over tighten it.. Is there a serten amount it should be tighten?? with the bike in neutral lift the chain in the middle of it's ...

Question about Honda CBR 600 F(4)i Motorcycles

1 Answer

...FZs and FZRs have this problem because people ran chains too tight. If your chain really is too loose then it will start making your gear changes harder to do, that's the sign you need to tighten

Question about Honda CBR 600 F(4)i Motorcycles

1 Answer

...is loose on my bike ........... Get it serviced & the carburetor balanced. Tighten the main chain & get the timing chain adjusted. Clean the plugs & the gap adjusted. Change engine

Question about Honda CBR 600 F(4)i Motorcycles

1 Answer

tighten the chain on my 2002 vfr800 vtech, it seems a bit loose and i can hear it dragging Set the bike on its center stand, then loosen the rear axle by removing cotter pin from hex nut and loosening

Question about Honda CBR 600 F(4)i Motorcycles

2 Answers

...and tight. Next, tighten each adjuster just a bit even though the axle is tight and the wheel will no longer move. This will put pressure on the adjusting nut and prevent having the nut come

Not finding what you are looking for?
2002 Honda CBR 600 F(4)i Logo

85 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6418 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...