1988 Honda CBR 1000 F "spray starting fluid" Questions

how can i use starting fluid on a carburetor for my cbr hi, gain accses to airbox intake, and spray starting fluid through here,

...check for corrosion, spray with contact cleaner, then anti-corrosion spray and reconnect. If you have spark check fuel. Spray starting fluid in carbs as you crank. Next would be pulse generator,

spray starting fluid into intake it starts. After it warms up it will start within the first 15 minutes after I turn it off. After 15 minutes it wont start. Spark plugs are firing and new. When I move

starting fluid and still will not start any suggestions? check crank position sensor or immobiliser system as you have not spark at the right time. Immobiliser may be a battery problem in the key unit

spray starting fluid in the carb?? It has not ran in over a year it has spark and new fuel will run for a few seconds if you spray starting fluid directly in the carb? Carb needs cleaning and possible

...spray starting fluid in the intake, then it will smoth out and run great until you stop spraying. when you start the Yamaha up, it acts like its starved for gas, on one cylinder, but when you spray ...

spray starter fluid into the intake on the breather or if i jump it off ! after the bike warms up it starts just fine but if you let it set for a while it wont start without jumping it off or spraying

...starting fluid have you checked for good compression? maybe the piston rings a shot also make sure that the exhaust is not blocked where are you spraying the starting fluid? into the airbox or ...

...spray starting fluid. tried bump starting it, won't start. your gonna want to remove the air filter, and spray into airbox. Peak inside first, look for the little hole that goes thru to the carb, aim ...

starts starting fluid Bike has been inactive for a few months, purchased a battery, but Bike will not turn over, where can I spray starter fluid Spray into the air-filter canister.